[f-nsp] Features on Brocade Ethernet platforms

[Robert Hass]

On Sat, Mar 12, 2011 at 4:46 PM, Frank Bulk <frnkblk at iname.com> wrote:
> Lots to like about the CER but we had to look at the MLX because the CER
> only has two 10GE ports.

Frank, CER for PE is just fine (2x10GE is enough). I need more 10GE
ports on L2 switch - where I'm try to use TI24X. If TI24X will not fit
then we will probably put Cisco Catalyst 4900M (8 x 10GE is OK as it's
expandable to 16 x 10GE).

Robert