[f-nsp] Outbound route

[Brendan Mannella]

Yep just realized I said glbx, I meant level3 session is where it should be applied. 

Thanks!

On Mar 24, 2011, at 8:53 PM, Kris Foster <kris.foster at gmail.com> wrote:

> 
> On Mar 24, 2011, at 5:39 PM, Brendan Mannella wrote:
> 
>> So i run EBGP with Level 3 and GBLX with two MLXe's, one transit on
>> each, the two routers run IBGP. Lately we have been having all kinds
>> of issues with GBLX --> Comcast. Currently my outbound path to comcast
>> goes through GBLX. I would like to change that to Level3. Will the
>> below work and is this the best way?
>> 
>> 
>> ip as-path access-list ComcastAS seq 5 permit _7922_
>> 
>> route-map ComcastToLevel3 permit 11
>> match as-path ComcastAS
>> set local-preference 110
>> 
>> 
>> I would then apply this to the GBLX session, correct?
> 
> Depends on what the local-preference is on the Level3 learned prefixes. Default is 100 and the highest LP is preferred. So assuming the LP on the GBLX learned prefixes is 100, you'd have success applying that to your Level3 session.
> 
> Kris