[f-nsp] 8x10GE

[Pelekh Petro]

Thank you everybody for the answer.

Can you advise me what to install next after Foundry SX800/SX1600(I
need 8x10Ge etherchannel):
Foundry MLX or Juniper MX as a core switch ?


Thank you.

> According to the FastIron 7.2 configuration guide, FastIron SX
> "IPv6" systems support up to 8 ports in a LAG. The v4 systems support up to 4 ports per
> LAG. This is true for 1Gbps ports or 10Gbps ports. 

> Sent from my iPad

> On Mar 29, 2011, at 2:21 PM, Pelekh Petro <ppetro at mail.lviv.ua> wrote:

>> Hello all,
>> 
>> 
>> Is Foundry SX800 or SX1600 support 8x10GE etherchannel? because only
>> 4x10GE etherchannel work.
>> 
>> Thank you.
>> 
>> 
>> _______________________________________________
>> foundry-nsp mailing list
>> foundry-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/foundry-nsp