[f-nsp] FastIron: many vlans

[Jonathan Brashear]

Bear in mind that when you need one of those VLANs to have a different characteristic(like tagged to different ports than the others, different spanning-tree priority, etc.) you're going to have to remove it from the group at that point. & re-define everything for that VLAN.

Jonathan Brashear
Brocade Resident Consultant, Americas BRCs, Advanced Services
jbrashea at brocade.com
www.brocade.com 


-----Original Message-----
From: foundry-nsp-bounces at puck.nether.net [mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Maarten Bollen | Atrato IP Networks
Sent: Thursday, October 06, 2011 10:12 AM
To: Randy McAnally
Cc: foundry-nsp at puck.nether.net
Subject: Re: [f-nsp] FastIron: many vlans


On Oct 6, 2011, at 4:56 PM, Randy McAnally wrote:

> On Thu, 6 Oct 2011 07:40:13 -0700, Jay Reitz wrote 
> > I don't know but you could always use perl: 
> > 
> > perl -e 'for (200..400) { print "vlan $_ by port\n tagged ethe 1 to 4\n!\n\n"; }'  
> 
> Uhg, I know, was just hoping for something in the CLI I was missing like: 
> 
> > int eth 1 to 24  <--- works 
> 
> > vlan 200 to 600 <--- no worky 

how about:
vlan-group 1 vlan 200 to 400
 tag e 1 to 4

Confirmed on TurboIron, not sure if it is an fastiron command.

Cheers,
Maarten
_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp