[f-nsp] BR-MLX-1GFx24-X configured as invalid module

[Frederic Jaeckel]

Hej,

I got these all new modules in completely new MLX4-e chassis and don't
know what the issue is, but the BR-MLX-1GFx24-X modules are always
recognized as invalid and put into interactive mode. I tried upgrading
the devices from IronWare 5.2c to IronWare 5.3b, but this didn't help.
The LP FPGA images, monitor and boot images are all up to date and the
linecard is not being recognized in both 5.2c and 5.3b. Anyone has an
idea why that is? I have 1GE Fiber SFPs in these linecards.

#sho mod
        Module                             Status      Ports  Starting MAC
M1 (left): NI-MLX-MR Management Module     Active
M2 (right): NI-MLX-MR Management Module     Standby (Ready State)
F1: NI-X-HSF Switch Fabric Module         Active
F2: NI-X-HSF Switch Fabric Module         Active
F3: NI-X-HSF Switch Fabric Module         Active
S1: BR-MLX-1GFx24-X 24-port 1GbE SFP Module  CARD_STATE_INTERACTIVE	0	
0024.38a5.4c00
(S1: Configured as invalid module)
S2: NI-MLX-10Gx8-D 8-port 10GbE (D) Module  CARD_STATE_UP	8	 0024.38a5.4c30
S3: NI-MLX-10Gx8-D 8-port 10GbE (D) Module  CARD_STATE_UP	8	 0024.38a5.4c60
S4:

# sho log
Aug 20 16:33:53:N:Module 1 is reset by mgmt (reason: boot to interactive mode)
Aug 20 16:33:36:N:System: Module was inserted to slot 1
Aug 20 16:33:25:N:System: Module was removed from slot 1

Cheers,
Frederic Jaeckel