[f-nsp] Redundant routes

Nick Gray ngray at cyberwurx.com
Tue Feb 7 14:07:20 EST 2012


'vlan123' is independent on either router but I can change it if
necessary. I had a feeling the client's side was having issues which
is why I was thrown figuring this out. Unfortunately, I do not have
access to the config on their side.

-Nick

On Tue, Feb 7, 2012 at 1:52 PM, George B. <georgeb at gmail.com> wrote:
>> I had a sneaking feeling it wasn't that easy though. One of the router
>> interfaces had to be shut down before traffic properly forwarded to
>> and from the client.
>
> The client side might be borked.  Do you have any visibility into the
> config on their side?  I would also put the two connections on
> separate vlans if vlan123 spans both routers on your side.
>
> George




More information about the foundry-nsp mailing list