[f-nsp] ServerIron400 + Outgoing ports are blocked.

[Sheremet Roman]

Hello guys,

Have a small problem with si400.

I have farm configured for two servers:

Virtual server: farm1                   Status: enabled  IP: x.x.x.x
        http -------> serv1: y.y.y.y,  http (Active)
                      serv2: z.z.z.z,  http (Active)

Load  balancing working Perfect, but when i try reach any website from
servers  y.y.y.y  or  z.z.z.z  its  not  works yet.... I can reach any
another  port  which non configured for load balancing at si400... but
80 - no ...

Can  someone  explain  me  this  problem  ?  Maybe  i miss in settings
something ? or this is normal situation for si400 ???


///
  SW: Version 09.4.00rT22 Copyright (c) 1996-2003 Foundry Networks, Inc.
      Compiled on Sep 15 2006 at 22:53:32 labeled as WSM09400r
      (3883186 bytes) from Secondary
  HW: ServerIron 400 Switch, SYSIF version 21, Serial #: Non-exist
==========================================================================
SL 1: B0GMR WSM4 Management Module, SYSIF 2, ACTIVE
      Serial #: Non-exist
    0 MB SHM, 3 Application Processors
 8192 KB BRAM, SMC version 1, BM version 21
  SW: (1)09.4.00rT72 (2)09.4.00rT72 (3)09.4.00rT72
==========================================================================
SL 2: B8GC Copper Switch Module, SYSIF 2
      Serial #: Non-exist
 2048 KB BRAM, SMC version 1, BM version 21
  512 KB PRAM(512K+0K) and 2048*8 CAM entries for DMA  4, version 0209
  512 KB PRAM(512K+0K) and shared CAM entries for DMA  5, version 0209
  512 KB PRAM(512K+0K) and 2048*8 CAM entries for DMA  6, version 0209
  512 KB PRAM(512K+0K) and shared CAM entries for DMA  7, version 0209
==========================================================================
Active management module:
  466 MHz Power PC processor 750 (version 8/8302) 66 MHz bus
  512 KB boot flash memory
16384 KB code flash memory
  256 KB SRAM
  512 MB DRAM
///


Thank you.