[f-nsp] VLAN problem on MLXe

[Alexander Shikoff]

On Fri, Jul 13, 2012 at 07:47:57PM +0300, Alexander Shikoff wrote:
> Hello!
> 
> I'm trying to create port-based VLAN on MLXe box. Current configuration is below:
> 
> vlan 777 name PUBLIC 
>  tagged ethe 1/2 
>  router-interface ve 1
> !
> !
> no route-only
> !
> interface ethernet 1/2
>  enable
> !
> interface ve 1
>  ip address 193.25.181.66/23
> 
> 
> Interface eth1/2 is up, but I cannot see any MAC address in this VLAN.
> But when I'm trying to ping 193.25.181.66 from outside of MLXe box,
> I see ARP entry with MAC address of MLXe.
> 
> What I missed?

Thanks to all who replied off-list :)
It was a problem with broken FPGA image on interface module.

-- 
MINO-RIPE