[f-nsp] Quick question regarding routing between vlans on Ti24

[Drew Weaver]

Hi,

I have a Turboiron 24x configured as such:

vlan 101 by port
tagged ethe 7
router-interface ve 101

vlan 998 by port
tagged ethe 19
router-interface ve 2

interface ve 2
ip address 192.168.227.1 255.255.255.248
!
interface ve 101
ip address 192.168.0.1 255.255.255.248

The hosts (192.168.227.2) and (192.168.0.2) can both ping their respective VEs, but they cannot ping one another.

I have static routes nailed up on the hosts:

192.168.0.0     192.168.227.1   255.255.224.0   UG    0      0        0 eth1
And
192.168.227.0   192.168.0.1     255.255.255.0   UG    0      0        0 em2

Anyone know what I need to do to tell it to go ahead and route ?

p.s. the reason the subnets configured on the hosts are larger than what is configured on the TI is because I intend on having multiple subnets reachable in both directions.

Thanks,
-Drew


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20120622/761369d0/attachment.html>