[f-nsp] Remove one interface from LACP group

[Robert Hass]

On Mon, Jun 4, 2012 at 11:05 PM, Mike Allen <mkallen at gmail.com> wrote:
> Robert, now that you have the port disabled, you should be able to go into
> the interface e 1/1/16, and do a no link-agg active.  Follow with a no
> link-agg conf key 30000 (might not be needed once you pull off the link-agg
> active), and you should be good to go.

Yeah. I tried. But I cannot enter interface 1/1/6. It doesn't matter
it's disabled or enabled.

telnet at lab(config-trunk-1/1/6)#int e 1/1/6
Error - cannot configure secondary ports of a trunk

telnet at lab(config)#show link-a | inc 1/1/6
1/1/6       1        1    30000   Yes   L   Agg  Syn  Col  Dis  Def  No   Dwn

:(

Rob