[f-nsp] Remove one interface from LACP group

Tamas Csillag tcsillag at interware.hu
Mon Jun 4 18:27:49 EDT 2012


I think you just set up a static trunk over the lacp trunk with this:

BR-telnet at fls(config)#trunk ethernet 0/1/3 to 0/1/6

Check a 'show trunk' and a 'show link-ag' output, just to be sure...

Tamas


On 06/05/2012 12:09 AM, Robert Hass wrote:
> On Mon, Jun 4, 2012 at 11:53 PM, Frank Bulk<frnkblk at iname.com>  wrote:
>> I haven't seemed to need to do that on the ICX6610 platform -- perhaps
>> that's the difference?
>
> It's ICX 6450 not 6610 :-)
> IronWare 7.4
>
> But it's not ICX related. I have same issue on old FastIron LS624 running 7.2.2d
>
> BR-telnet at fls(config)#trunk ethernet 0/1/3 to 0/1/6
> BR-telnet at fls(config-trunk-0/1/3-0/1/6)#config-trunk-ind
> BR-telnet at fls(config-trunk-0/1/3-0/1/6)#disable ethernet 0/1/6
> BR-telnet at fls(config-trunk-0/1/3-0/1/6)#int ethernet 0/1/6
> Error - cannot configure secondary ports of a trunk
>
> Rob
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp




More information about the foundry-nsp mailing list