[f-nsp] Remove one interface from LACP group

[Mike Allen]

Try exit after you disable the port within the trunk.  You are still in the
trunk configuration, different context.  I don't have one to check this on
right now.

Mike

On Mon, Jun 4, 2012 at 3:09 PM, Robert Hass <robhass at gmail.com> wrote:

> On Mon, Jun 4, 2012 at 11:53 PM, Frank Bulk <frnkblk at iname.com> wrote:
> > I haven't seemed to need to do that on the ICX6610 platform -- perhaps
> > that's the difference?
>
> It's ICX 6450 not 6610 :-)
> IronWare 7.4
>
> But it's not ICX related. I have same issue on old FastIron LS624 running
> 7.2.2d
>
> BR-telnet at fls(config)#trunk ethernet 0/1/3 to 0/1/6
> BR-telnet at fls(config-trunk-0/1/3-0/1/6)#config-trunk-ind
> BR-telnet at fls(config-trunk-0/1/3-0/1/6)#disable ethernet 0/1/6
> BR-telnet at fls(config-trunk-0/1/3-0/1/6)#int ethernet 0/1/6
> Error - cannot configure secondary ports of a trunk
>
> Rob
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20120604/7385d3cb/attachment.html>