[f-nsp] NI-MLX-10Gx8-D falls to CARD_STATE_INTERACTIVE mode

[Jeroen Wunnink | Atrato IP Networks]

And if that doesn't work, do a 'lp sync <linecardnumber>', it will sync 
the lp's flash from the one stored in the management module's flash


On 6/21/12 2:14 AM, Niels Bakker wrote:
> * minotaur at crete.org.ua (Alexander Shikoff) [Thu 21 Jun 2012, 02:11 
> CEST]:
> [..]
>> As far as I understand there is no image for LP at all.
>
> Looks like it, yes.
>
>
>> Thus I should download it to the management module firstly and only 
>> after that initiate synchronization. Right?
>
> Just follow the upgrade procedure in the release notes, the "copy tftp 
> lp 1.2.3.4 lpfoobar5200xyz.bin primary all" command will drop off a 
> copy at the mgmt module's flash too.
>
>
>     -- Niels.
>


-- 

Jeroen Wunnink
Network Engineer
Atrato IP Networks
jeroen.wunnink at atrato-ip.com
Phone: +31 20 82 00 623