[f-nsp] Debugging CPU usage on XMR

George B. georgeb at gmail.com
Fri Mar 30 11:12:26 EDT 2012


I've seen that happen with boxes using dynamic cam mode.  Are you
using that mode?



On Fri, Mar 30, 2012 at 12:19 AM, Remco Bressers <remco at signet.nl> wrote:
> Hi list,
>
> We are running a few XMR's in our network where one of them is showing
> increased CPU usage on ip_rx. The box is not doing enormous amounts of
> traffic (<10Gig) and a similar configuration on a different part of the
> network isn't showing any CPU usage problems.
> What is the best way to debug CPU issues like this and how can i get a
> better insight in the way an XMR uses CPU cycles? A "show cpu" and "show
> tasks" shows me what i already know and now i find it very hard to debug.
>
> Any ideas?
>
> Regards,
>
> Remco Bressers
> Signet BV
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp



More information about the foundry-nsp mailing list