[f-nsp] Power consumption SuperX 800 / 1600

[Clement Cavadore]

Hi,

Here is the config I have:

telnet at xxxxxx#sh ver | i FastI
  HW: Chassis FastIron SX 1600-PREM (PROM-TYPE SX-FIL3U)
  HW: Chassis FastIron SX 1600-PREM (PROM-TYPE SX-FIL3U)
telnet at xxxxxx#sh mod
     Module                                   Status    Ports Starting MAC 
 F1: SX-FISF Switch Fabric                    active  
 F2: SX-FISF Switch Fabric                    active  
 S1: SX-FI42XG 2-port 10G                     OK          2   xx
 S2: SX-FI424F 24-port Gig Fiber              OK         24   xx
 S3: SX-FI424C 24-port Gig Copper             OK         24   xx
 S4: SX-FI424C 24-port Gig Copper             OK         24   xx
 S5: SX-FI424C 24-port Gig Copper             OK         24   xx
 S6: SX-FI424C 24-port Gig Copper             OK         24   xx
 S7: SX-FI424C 24-port Gig Copper             OK         24   xx
 S8: SX-FI424C 24-port Gig Copper             OK         24   xx
 S9: SX-FIZMR4 0-port Management              Active      0
     { Status : OK }
S10: SX-FIZMR4 0-port Management              Standby     0
     { Status : OK }
S11: SX-FI424C 24-port Gig Copper             OK         24   xx
S12: SX-FI424C 24-port Gig Copper             OK         24   xx
S13: SX-FI424C 24-port Gig Copper             OK         24   xx
S14:
S15:
S16:
S17:
S18: SX-FI42XG 2-port 10G                     OK          2   xx


... and here is what powers it sucks on each of its power supply:

telnet at xxxxxx#sho pow | i Cons
    Consumption:      234 Watts
    Consumption:      219 Watts
    Consumption:      186 Watts
    Consumption:      219 Watts

I have one LR and one SR optic on the 10G modules, and two LX plus 4 SX
optics on the SFP module.

Hope it helps !

Regards
-- 
Clément Cavadore

On 10/02/2012 01:11 PM, Nicolaj Kamensek wrote:
> Hi list,
>
> I'm looking for some experience knowledge regarding the power
> consumption respectively the difference between the SX800 and the
> SX1600 chassis with the same, non-PoE configuration.
>
>
> Thanks for any hints!
>
>
> Nico
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp