[f-nsp] NI-MLX-10Gx8-M TM Health Error

[Matt Kassawara]

Looks like a hardware problem related to the traffic manager handling
those ports.  I suggest contacting Brocade support.

On Tue, Sep 11, 2012 at 12:18 PM, Dave Peters - Terabit Systems
<Dave at terabitsystems.com> wrote:
> Hey all—
>
>
>
> I’ve got a NI-MLX-10Gx8-M running on an MLXe-16, software version 5.300a.
> The top four ports (3/1 to 3/4)  work just fine, but when I plug a cable
> into port 5 or 6, the card abruptly power cycles, and continues to do so
> until I unplug that port.
>
>
>
> In the logs (below) I’m getting a “TM Health Monitoring” error.
>
>
>
> Has anyone experienced anything like this? Any advice?
>
>
>
> As always, much appreciated.
>
>
>
> --Dave Peters
>
>
>
> Dynamic Log Buffer (50 lines):
>
> Sep 11 18:21:12:N:System: Module 5 powered on
>
> Sep 11 18:21:11:N:System: Module 5 powered off
>
> Sep 11 18:21:11:I:System: Interface ethernet 5/6, state down - unspecified
>
> Sep 11 18:21:11:N:System: Module down in slot 5, reason
> CARD_DOWN_REASON_POWERED
>
> _OFF_BY_USER. Error Code 0
>
> Sep 11 18:21:11:D:System: TM Health Monitoring detects an issue in slot 5
> ppcr 1
>
> Reg Offset 00000000 Value 00000004
>
> Sep 11 18:21:11:D:System: Module reset in slot 5, triggered by TM Health
> Monitor
>
> ing
>
> Sep 11 18:21:06:I:System: Interface ethernet 5/6, state up
>
> Sep 11 18:21:06:I:System: Interface ethernet 5/8, state down - link down
>
> Sep 11 18:21:06:W:SYSTEM: Optic is not factory qualified (port 5/8).
>
>     Type  : 10GE SR 300m SFP+
>
>     Vendor:          FINISAR CORP.   , Version:                 A
>
>     Part# :          FTLX8571D3BCL   , Serial#:     UBK00GS
>
> Sep 11 18:21:05:I:System: Interface ethernet 5/8, state up
>
> Sep 11 18:20:26:I:Security: running-config was changed by operator from
> console
>
> Sep 11 18:20:24:I:PORT: 5/8 enabled by operator from console session.
>
> Sep 11 18:20:24:I:PORT: 5/7 enabled by operator from console session.
>
> Sep 11 18:20:24:I:PORT: 5/6 enabled by operator from console session.
>
> Sep 11 18:20:24:I:PORT: 5/5 enabled by operator from console session.
>
> Sep 11 18:20:24:I:PORT: 5/4 enabled by operator from console session.
>
> Sep 11 18:20:24:I:PORT: 5/3 enabled by operator from console session.
>
> Sep 11 18:20:24:I:PORT: 5/2 enabled by operator from console session.
>
> Sep 11 18:20:24:I:PORT: 5/1 enabled by operator from console session.
>
> Sep 11 18:19:35:N:System: Module up in slot 5
>
> Sep 11 18:19:14:N:System: Module up in slot 3
>
> Sep 11 18:19:03:D:TM logging started by an event trigger
>
> Sep 11 18:18:33:I:System: Warm start
>
> Sep 11 18:18:33:N:System: IfIndex assignment was changed
>
> Sep 11 18:18:33:A:System: AC Power Supply 4 , 4th from left (top row),
> Installed
>
> (OK)
>
> Sep 11 18:18:32:A:System: AC Power Supply 3 , 3rd from left (top row),
> Installed
>
> (OK)
>
> NetIron MLX-16 Router#