[f-nsp] Serveriron XL/G questions

[CWO Network Operations]

Hello,

One of my networks uses a Serveriron XL/G fiber L4 Gigibit switch. After a power loss, the boot image on the switch became corrupted and I was only able to boot from the backup image. Unfortunately the backup boot image is quite old and some commands, such as 'tcp l4-check-only' don't seem to exist in this version (07.1.08T42). Does anyone know what the current/last software version for this, somewhat aged, switch is? Does Foundry/Brocade still supports the older ServerIron XL/G switches in terms of providing software images for them?

Please let me know....

Thanks
JB


Current software version

#sho ver
SW: Version 07.1.08T42 Copyright (c) 1996-1999 Foundry Networks, Inc.
    Compiled on Dec 18 2000 at 18:15:31 labeled as BSI07108
HW: Stackable SLB, SYSIF version 10
==========================================================================
  T8F Fiber
2048 KB BRAM, SMC version 1, ICBM version 21
128 KB PRAM(128K+0K) and 2048*4 CAM entries for DMA  0, version 0209
128 KB PRAM(128K+0K) and shared CAM entries for DMA  1, version 0209
128 KB PRAM(128K+0K) and 2048*4 CAM entries for DMA  2, version 0209
128 KB PRAM(128K+0K) and shared CAM entries for DMA  3, version 0209
==========================================================================
400 MHz Power PC processor 740 (verion 8/8202) 66 MHz bus
128 KB boot flash memory
4096 KB code flash memory
512 KB SRAM
 32 MB DRAM