[f-nsp] NetIron CER 2000 as a metro switch

[Eric Louie]

What’s the difference between the CER and the CES?  From the local Systems Engineer, he says “L3 VPNs on the CER, L2 VPNs on the CES”.  Any other notable differences?

 

much appreciated,

Eric Louie

 

From: Youssef Bengelloun-Zahr [mailto:youssef at 720.fr] 
Sent: Wednesday, August 28, 2013 3:45 PM
To: Eric Louie
Cc: foundry-nsp
Subject: Re: [f-nsp] NetIron CER 2000 as a metro switch

 

Hello Eric,

 

I have been running CER-RT as route reflectors and MPLS PEs for our "small" POPs just fine.

 

Now, if you are looking for metro switchs as a replacement for Cisco ME3600, you should probably take a look at the CES switchs destined for that typical use case.

 

Again, it all depends on your requirements/needs/sizing which you didn't specify.

 

HTH.

 


Le 29 août 2013 à 00:31, "Eric Louie" <elouie at yahoo.com> a écrit :

I’m considering using the CER 2000 as a mpls PE switch.  I have been told that the CER-RT can also be used as an Internet edge switch (will hold multiple BGP tables)

 

I’m interested in your experiences in configuration and operation in either application.  What are you using for CE devices?  (Brocade doesn’t seem to have a branch office router)

 

(Currently using Cisco ME3600-X for PE and c871 for CE)

 

much appreciated,

Eric Louie

 

_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20130828/9c5346db/attachment.html>