[f-nsp] 100% cpu utilization for 1-2 minutes every 30 minutes

[Eric A Louie]

yes it is, but there is no seeming correlation other than that.  Is it possible to change the flood interval either shorter or longer on the Foundry's to see if that's what the cause is?





>________________________________
> From: Brant Ian Stevens <branto at argentiumsolutions.com>
>To: Eric A Louie <elouie at yahoo.com> 
>Cc: Foundry NSP <foundry-nsp at puck.nether.net> 
>Sent: Thursday, June 20, 2013 4:42 PM
>Subject: Re: [f-nsp] 100% cpu utilization for 1-2 minutes every 30 minutes
> 
>
>
>Isn't 30 minutes the flood interval for OSPF?
>
>
>Eric A Louie wrote: 
>eplaced it and still see the same behavior.
>>
>>
>>When I reboot the router, it behaves for a short time 
(sometimes 3-5 days, sometimes 3-5 hours), and the behavior resumes.
>>
>>
>>We're running OSPF with two neighbors and I see this sequence of log messages on the target router sometimes before the cpu spikes, but there's not a 100% correlation between this and 
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20130620/109346b5/attachment.html>