[f-nsp] Lost Password FCX stack switchs

[Youssef Bengelloun-Zahr]

Hello,

Follow up : Using another computer, I was able to enter boot monitor mode
and perform password recovery procedure.

Now, new problem when I try to upgrade software version from FCXS07300f to
FCXS07400b, I keep on hitting this message :

telnet at ag01-ams01#copy tftp flash 10.101.1.1
fcx_last/740b/Images/FCXS07400b.bin primary
File name is too big

Any ideas ?

Y.



2013/10/6 Youssef Bengelloun-Zahr <youssef at 720.fr>

> On both units forming the stack, very slow.
>
> Y.
>
>
>
> Le 6 oct. 2013 à 19:55, Brian Loveland <brian at aereo.com> a écrit :
>
> Are you seeing slow console on both units or just one?
>
> We have lots of ICX6610 stack's deployed, if you are trying to console to
> the unit that is not the master, the console will be very slow as its
> remote console into the master.
> But the bootup console is directly on each unit (before the stack is
> setup) so perhaps thats not the issue.
>
> On Sun, Oct 6, 2013 at 1:14 PM, Youssef Bengelloun-Zahr <youssef at 720.fr>wrote:
>
>> Hello Niels,
>>
>> Again, console port is really responding very slowly.
>>
>> For some kind of reason I can't explain, it won't let me enter boot
>> monitor mode even when keep on hiting 'b' stroke. Very weird shit !?!
>>
>> I guess I'll try with a different computer + serial cable tomorrow.
>>
>> Y.
>>
>>
>>
>> Le 6 oct. 2013 à 18:47, Niels Bakker <niels=foundry-nsp at bakker.net> a
>> écrit :
>>
>> > * youssef at 720.fr (Youssef Bengelloun-Zahr) [Sun 06 Oct 2013, 12:58
>> CEST]:
>> >> When I tried to log in again, I was prompted for a login/password. I
>> didn't configure any before rebooting.
>> >
>> > You may have configured a different AAA model, which, if you omit
>> users, will lead to lockout.
>> >
>> >
>> >> All usual dumb passwords don't work, and I can't enter the boot
>> monitor mode when I reload the stack !?! So, classic lost password recovery
>> procedure isn't helpfull here.
>> >
>> > What do you mean with "can't"?  Just send 'b' over the serial console
>> several times directly after a powercycle, and follow the rest of the
>> instructions in the FastIron Config Guide ("no password" and so on).
>> >
>> >
>> >    -- Niels.
>> >
>> > --
>> > _______________________________________________
>> > foundry-nsp mailing list
>> > foundry-nsp at puck.nether.net
>> > http://puck.nether.net/mailman/listinfo/foundry-nsp
>>
>> _______________________________________________
>> foundry-nsp mailing list
>> foundry-nsp at puck.nether.net
>> http://puck.nether.net/mailman/listinfo/foundry-nsp
>>
>
>


-- 
Youssef BENGELLOUN-ZAHR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20131007/74d8ca17/attachment.html>