[f-nsp] CAM IP partition warning – Error Help MLXe X 1 million routes
Mike Tindle
mtindle at he.net
Wed Aug 6 23:01:04 EDT 2014
James,
Did you also change the cam-partiion profile you are using?
router#sh cam-part | i profile
CAM partitioning profile: ipv4-ipv6-2
If you’re using the default profile, it will still have the tcam carved for 512k IPv4 routes.
Also, updating the cam profile takes a reload.
Regards,
Mike
On Aug 6, 2014, at 7:23 PM, James B <qcb771 at hotmail.com> wrote:
>
> Hi All
>
> We are using both 5.3d and 5.4d on different devices and getting the same errors on different MLXe X platform, which should support 1 million routes.
>
> CAM IP partition warning: total 524288 (reserved 0), free 26214, slot 3, ppcr 1
>
> However we have increased the ip-route and ip-cache cam to maximum:
>
> System Parameters Default Maximum Current Actual Bootup Revertible
> mac 131072 2097152 131072 131072 131072 Yes
> vlan 512 4095 1024 1024 1024 No
> spanning-tree 32 128 32 32 32 No
> rstp 32 128 32 32 32 No
> ip-arp 8192 65536 8192 8192 8192 No
> ip-cache 204800 1048576 1048576 1048576 1048576 Yes
> ip-route 204800 1048576 1048576 1048576 1048576 Yes
>
>
> Whilst the error is for 500k routes the maximum is set to 1 million routes, what could be causing these errors ?
>
> Thanks
>
> James
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
*----------- H U R R I C A N E - E L E C T R I C ---------->>
| Mike Tindle | Senior Network Engineer | mtindle at he.net
| ASN 6939 | http://www.he.net | 510-580-4126
*--------------------------------------------------->>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20140806/bad11d3f/attachment.html>
More information about the foundry-nsp
mailing list