[f-nsp] 802.1q-in-q question/verification.

Dimitar Kostadinov kgb at bginfo.net
Mon Feb 3 03:57:50 EST 2014


On Friday 31 January 2014 11:36:30 Todd Adamson wrote:
> Hello all.  This is my first foray into 802.1q-in-q and I
> want to make sure that I am doing this correctly.  I have a
> MLXe, version 5.5.0c running that has a client utilizing 5
> fiber ports for their own routed backbone network.  I
> currently have them running on their own VLAN and all is good.
> 
> But they now want to change their setup and utilize their
> own VLANs between locations.  To prevent any customer vlan
> leakage or overlapping of VLAN numbers, I'm planning to
> incorporate q-in-q on their ports.  After reading the docs,
> it appears that all I have to do is add the following
> command to the MLXe:
> 
> tag-type 9150 eth 3/11 to 3/15
> 
> Is this all I have to do?  Am I missing something?
> 
> Any help/suggestions are appreciated.
> 
> Todd


Hi, here

And yes this is all, just need change tag-type :)

make fun

Mitko



More information about the foundry-nsp mailing list