[f-nsp] BR-MLX-10Gx8-X in an XMR with HSF, will give me line rate?

[Matt Kassawara]

I believe the XMR will support MLX modules... not the other way around.
 However, with the XMR and MLX replaced by the MLXe, I'm not sure if the
former platforms support the latest high-density interface modules.


On Thu, Jan 16, 2014 at 3:39 PM, Richard Laager <rlaager at wiktel.com> wrote:

> On Thu, 2014-01-16 at 13:43 -0800, Carlos Alfaro wrote:
> > Would be grateful if anyone can confirm whether using BR-MLX-10Gx8-X in
> an XMR with HSF, will give me line rate?
>
> I could be wrong, but I don't think it'll work at all. That's an MLX
> card; you can't use it with XMR management modules.
>
> --
> Richard
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20140116/498021fe/attachment.html>