[f-nsp] LACP with Foundry and Linux Machine

[Rupesh Basnet]

Hi All,

I have been trying LACP between Foundry and Linux machine since some 
days but not able to figure out the issue and resolve the issue. I 
didn't see much configurations thats needs to be done on foundry. I have 
configured my linux box on mode 0 and bonding seems to be up but still I 
am not able to pass traffic through it.

Serveriron Configurations:

interface ethernet 4/2
  port-name **LACP-with-Linux***
  no spanning-tree
  link-aggregate active
!
interface ethernet 4/3
  port-name **LACP-with-Linux***
  no spanning-tree
  link-aggregate active
!


SI#show version
   SW: Version 09.3.00eTD4 Copyright (c) 1996-2003 Foundry Networks, Inc.
       Compiled on Jun 28 2005 at 18:57:32 labeled as WXR09300e
   HW: ServerIronGT E-2 Router, SYSIF version 21, Serial #: Non-exist
==========================================================================
SL 1: B0GMR WSM2 Management Module, SYSIF 2, M6, ACTIVE
       Serial #:   CH39040033
     0 MB SHM, 2 Application Processors
16384 KB BRAM, SMC version 1, BM version 21
   SW: (1)09.3.00eTF2 (2)09.3.00eTF2
==========================================================================
SL 4: J-BxGC16 JetCore Gig Copper Module, SYSIF 2
       Serial #:   CH33060779
  4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a
32768 KB PRAM and 2M-Bit*1 CAM for IGC 12, version 0449
32768 KB PRAM and 2M-Bit*1 CAM for IGC 13, version 0449
32768 KB PRAM and 2M-Bit*1 CAM for IGC 14, version 0449
32768 KB PRAM and 2M-Bit*1 CAM for IGC 15, version 0449


SI#show link-aggregate
System ID: 000c.db5d.b066
Long  timeout: 90, default: 90
Short timeout: 3, default: 3
Port  [Sys P] [Port P] [ Key ] [Act][Tio][Agg][Syn][Col][Dis][Def][Exp][Ope]
4/2        1        1     483   Yes   S   Agg  Syn  Col  Dis  Def No   Ope
4/3        1        1     483   Yes   S   Agg  Syn  Col  Dis  Def No   Ope


Status of linux machine:
MII Status: up
MII Polling Interval (ms): 30000
Up Delay (ms): 0
Down Delay (ms): 0

Slave Interface: eth0
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:e0:ed:2b:a1:99
Slave queue ID: 0

Slave Interface: eth1
MII Status: up
Speed: 1000 Mbps
Duplex: full
Link Failure Count: 0
Permanent HW addr: 00:e0:ed:2b:a1:98
Slave queue ID: 0

-- 
Regards,
--------
Rupesh Basnet