[f-nsp] ADX 1000 SI-1216-4-PREM ASM-1 BP-1 state: 5 BP not ready/ BP App Timeout

[Carlos Alfaro]

After upgraded the routing code to:ASR12200.bin  

monitor> show ver
  Boot     12.01.00T405     Feb 26 2010 11:39:50 PST dob12100ba
  Monitor  12.01.00T405     Feb 26 2010 11:39:50 PST dob12100ba (boot)
  1.499 GHz Power PC processor MPC8572E (version 8021/0030) 599.9616 MHz bus
Monitor>

Monitor> show flash
Boot Flash Memory  : AM29LV040B
  Manufacture Code : 01
  Device Code      : 4f
Code Flash Memory  : MT28F256J3
  Manufacture Code : 89
  Device Code      : 1d
Monitor>

I have the following error in BP  asm-1 BP-1 

slot-asm, err BP App Timeout

 Error: task_bringup_asm only 1/4 bps are ready on slot-asm, err BP App Timeout
   ASM-1 BP-1 state: 5 BP not ready
   ASM-1 BP-2 state: 8 Image Loaded
   ASM-1 BP-3 state: 8 Image Loaded
   ASM-1 BP-4 state: 8 Image Loaded
task_bringup_system: got msg, type 1, par0 00000008, par1 0000000a

ServerIronADX 1000#show asm
    slot-asm      Yes                   BP App Timeout          BAD
       bp 1: BP not ready
       bp 2: Image Loaded
       bp 3: Image Loaded
       bp 4: Image Loaded


Error: task_bringup_asm only 0/4 bps are ready on slot-asm, err BP App Timeout
   ASM-1 BP-1 state: 5 BP not ready
   ASM-1 BP-2 state: 8 Image Loaded
   ASM-1 BP-3 state: 8 Image Loaded
   ASM-1 BP-4 state: 8 Image Loaded

*******************************************************************************************

ServerIronADX 1000#show ver
Copyright (c) 1996-2009 Brocade Communications Systems, Inc.
Boot Version 12.0.00T405 May  5 2009 17:32:40 PDT label: dob12000
Monitor Version 12.0.00T405 May  5 2009 17:32:40 PDT label: dob12000
System Version 12.0.00aT403 Jul 28 2009 17:12:17 PDT label: ASR12000a
AXP Version: 0.00 Dated: 2009/07/04 08:02:57
PAX Version: 0.0 Dated: 2009/01/23 11:46:57
MBRIDGE Version: 000b, Device ID # bebe

==========================================================================
Type:   Stackable 16GC_2x10G
      Serial #:   E2SA42E01S
      Part #:   84-1001008-01
      SSL Card - Serial #: SA14100312
      Version #: 13b626-020202-111d8036-00
==========================================================================
Active management module:
       1499 MHz Power PC processor (version 00008021/0030) 599 MHz bus
       1408 KB Boot flash
      131072 KB Code flash
       2048 MB DRAM
The system uptime is 2 minutes 7 seconds
The system started at 21:14:07, GMT+00, Tue May 06 2014

The system - boot source: primary, mode: warm start,   soft reset, total resets:0

ServerIronADX 1000#

ServerIronADX 1000#show asm
    slot-asm      Yes                   BP App Timeout          BAD
       bp 1: BP not ready
       bp 2: Image Loaded
       bp 3: Image Loaded
       bp 4: Image Loaded


Error: task_bringup_asm only 0/4 bps are ready on slot-asm, err BP App Timeout
   ASM-1 BP-1 state: 5 BP not ready
   ASM-1 BP-2 state: 8 Image Loaded
   ASM-1 BP-3 state: 8 Image Loaded
   ASM-1 BP-4 state: 8 Image Loaded
task_bringup_system: got msg, type 1, par0 00000008, par1 0000000a
Re-tuning TCAM interface
Using TCAM frequency 350

*******************************************************
copy process :
copy tftp flash 192.168.0.14 ASR12200.bin pri
................................................................................Done

Monitor> copy tftp flash 192.168.0.14 ASR12200.bin sec

................................................................................Done

************************************************************


if anyone have been there, please tell me what can i do the fix the issue. or is a hardware failure?

I'll appreciate all help .


Thanks

Carlos Alfaro  Tech / Sales Support

Townsend Networks

35 Reed Blvd., Suite A  Mill Valley, CA 94941                    

415-384-4208 

mailto:carlos at townsendnetworks.com