[f-nsp] Multiple subnets on same VLAN

[José Santos]

Hi,

I'm needing to merge two subnets that were before in two diferent VLANs in
the same VLAN (attached to one untagged ethernet port) in a MLX router.

I configured multiple IP subnets in the same router-interface and I'm
experiencing a lot of network issues. I am now trying to configure the
subnets, let's say 192.168.50.1/24, 192.168.51.1/24 and 192.168.52.1/24 in
distinct virtual interfaces belonging to the same VLAN, however I am not
being able to accomplish this since only one router-interface is allowed.

I thought configuring them in different loopback ports and then configure
multiple unnumered interfaces or trunk various VLANs but none of this ideas
seem possible as well.

Anyone knows how can I accomplish this and can provide a brief config
example?

Thank you in advance!

-- 
Best Regards,
José
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20141112/df4e606f/attachment.html>