[f-nsp] Trunk Between Cisco VSS MLX

[Hambi, Harry]

Hi All,
Have a 4 Gig trunk configured between Cisco VSS & MLX. 2 Gig from MLX goes to each of the switches in the VSS pair. I’m getting the following error at the Brocade end of the trunk  LACP- BLOCKED. Checked config of working half of trunk all looks the same. Has anyone seen this error?.


Rgds
Harry

Harry Hambi BEng(Hons)  MIET  Rsgb


Atos, Atos Consulting, Worldline and Canopy The Open Cloud Company are trading names used by the Atos group. The following trading entities are registered in England and Wales: Atos IT Services UK Limited (registered number 01245534), Atos Consulting Limited (registered number 04312380), Atos Worldline UK Limited (registered number 08514184) and Canopy The Open Cloud Company Limited (registration number 08011902). The registered office for each is at 4 Triton Square, Regent’s Place, London, NW1 3HG.The VAT No. for each is: GB232327983.

This e-mail and the documents attached are confidential and intended solely for the addressee, and may contain confidential or privileged information. If you receive this e-mail in error, you are not authorised to copy, disclose, use or retain it. Please notify the sender immediately and delete this email from your systems. As emails may be intercepted, amended or lost, they are not secure. Atos therefore can accept no liability for any errors or their content. Although Atos endeavours to maintain a virus-free network, we do not warrant that this transmission is virus-free and can accept no liability for any damages resulting from any virus transmitted. The risks are deemed to be accepted by everyone who communicates with Atos by email.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20141022/8161a6ab/attachment.html>