[f-nsp] Routes being ignored with MLX4

[Franz Georg Köhler]

Hello,


this could be bogon filtering.

You can try to disable it and afterwards reinstall thge route manually:

no ip martian filtering-on


Best regards,

Franz Georg Köhler

Am 01.10.14 um 21:19 schrieb José Santos:
> Hi,
> 
> We are new to Brocade and we are experiencing an unexpected behavihor:
> 
> We have an MLX 4 with 5.6b, receiving a full routing table, including
> default route from our ISP.
> 
> We are receiving multiple routes from our internal devices like
> 192.168.0.0/25, 192.168.0.128/25 and aggregating with aggregate-address
> 192.168.0.0/24 summary-only.
> 
> We have this same setup with other networks that work perfectly, however
> before had this same issue and worked intermitently. This one give us
> always TTL exceeded with ping test from outside and in a traceroute we can
> see it looping towards our ISP. From the router we are able to ping the
> IPs.
> 
> We tried to advertise the /24 route from another device with iBGP, however
> it's ignored and the traffic is still is routed to our ISP.
> 
> Even after configuring an static route to an internal device, it's ignored
> as well and the 0.0.0.0/0 route is used to route traffic.
> 
> If we poing the default route to null0 we lose the TTL exceeded messages
> but we lose connectivity as well. We pointed a static to the device where
> our /25s and /24 is being advertised right now (192.168.0.26) and
> everything started working...
> 
> We thought about no free CAM space to install routes, however we don't have
> any warning/error message in logs and we have 50 free routes.
> 
> May this this be related with classless / classful routing implementations?
> We find very weird to have a more specific route ignored to a
> default-route, even when a "show ip route" shows the more specific one
> choosen. We never had this behavior before.
> 
> Thank you in advance for your help!
>