[f-nsp] FW: q-in-q termination

[Stavros Patiniotis]

Hi,

 

I'm trying to terminate the inner vlan of a q-in-q frame onto a routed
interface of a CES/CER router. I have the following setup, which isn't
currently work.  I can see the mac of the remote end, but I cannot ping.
Here's what I have so far.

 

Outer Vlan 3 (0x8100)
Inner Vlan 120 (0x8100)

Ethernet 2/2  q-in-q 'trunk'

Port ethernet 1/24 is physically patched to ethernet 1/23

 

!
vlan 3 name outervlan

tagged ether 2/2

untagged ether 1/24

!

vlan 120 name innervlan

tagged ether 1/23

router-interface ve 3

!

interface ve 3

ip address 192.168.0.1/30

!

 

#sh mac-address vlan 120

Total active entries for VLAN: 120  = 1

Type Code - ST:Static SEC:Secure 1x:Dot1x NA: NotAvail A:Allow D:Deny

CCL: Cluster Client Local CCR:Cluster Client Remote CL:Local CR:Remote

Port Type - CEP:Customer Edge PNP:Provider Network BEP:Backbone Edge

BNP:Backbone Network

Vlan Type - C:Customer S:Service B:Backbone I:ISID

MAC Address    Port     Age  VLAN      Type     FDID   TNID   ESI

d4ca.6d01.5048 1/23     20   120                              Default_ESI

 

 

Anyone have any ideas on how I can make this work?

 

Thanks

 

Stavros

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20150416/3aa3e246/attachment.html>