[f-nsp] XMR image names

[Jake Mertel]

Not sure what the actual translations of the acronyms is, although I'd bet
the PP in XPP is Packet Processor. Quoting from some IronWare release notes
that, while geared towards explaining "show" output, provide some useful
insight into the purpose of the files:

 PBIF image information – The version number of the PBIF image. This image
is installed on both Ethernet and POS Interface modules but from different
image files. The versions installed on Ethernet and POS Interface modules
can differ and should reflect the correct image for your release.

XPP image information – The version number of the XPP image. This image is
installed on both Ethernet and POS Interface modules but from different
image files. The versions installed on Ethernet and POS Interface modules
can differ and should reflect the correct image for your release.




--
Regards,

Jake Mertel
Nobis Technology Group, LLC



*Web: *http://www.nobistech.net
*Phone: *1-480-212-1710
*Mail:* 5350 East High Street, Suite 300, Phoenix, AZ 85054



On Wed, Aug 5, 2015 at 12:52 PM, joe mcguckin <joe at via.net> wrote:

> What’s an XPP, PBIF? I assume these are gate arrays on the interface
> cards? Does anyone know what the names mean?
>
> Thanks,
>
> Joe
>
>
> Joe McGuckin
> ViaNet Communications
>
> joe at via.net
> 650-207-0372 cell
> 650-213-1302 office
> 650-969-2124 fax
>
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20150805/e70e025a/attachment.html>