[f-nsp] Flapping stack

[Nick Cutting]

Good afternoon chaps,

I have a flapping stack cable - but I can't seem to disable one of the cables - anyone knowhow to do this?

Any Ideas?

Boot-Monitor Image size = 370695, Version:10.1.00T7f5 (grz10100)
  HW: Stackable ICX6610-24

SAN02#sh stack stack-ports 
    active       standby                                                       
     +---+        +---+                                                        
 =2/6| 1 |2/1==2/6| 2 |2/1=                                                    
 |   +---+        +---+   |                                                    
 |                        |                                                    
 |------------------------|                                                   

U#  Stack-port1                                  Stack-port2            
1   up (1/2/1-1/2/2)                             up (1/2/6-1/2/7)       
    up ports: 1/2/1, 1/2/2, 1/2/3, 1/2/4, 1/2/5
    up ports: 1/2/6, 1/2/7, 1/2/8, 1/2/9, 1/2/10

2   up (2/2/1-2/2/2)                             up (2/2/6-2/2/7)       
    up ports: 2/2/1, 2/2/2, 2/2/3, 2/2/4, 2/2/5
    up ports: 2/2/6, 2/2/7, 2/2/8, 2/2/9, 2/2/10




Aug 13 16:30:48:I:System: Interface ethernet 2/2/6, state up
Aug 13 16:30:47:I:System: Interface ethernet 2/2/6, state down
Aug 13 16:30:47:I:System: Interface ethernet 2/2/6, state up
Aug 13 16:30:45:I:System: Interface ethernet 2/2/6, state down
Aug 13 16:30:45:I:System: Interface ethernet 2/2/6, state up
Aug 13 16:30:44:I:System: Interface ethernet 2/2/6, state down
Aug 13 16:30:43:I:System: Interface ethernet 2/2/6, state up
Aug 13 16:30:42:I:System: Interface ethernet 2/2/6, state down
Aug 13 16:30:41:I:System: Interface ethernet 2/2/6, state up
Aug 13 16:30:40:I:System: Interface ethernet 2/2/6, state down
Aug 13 16:30:40:I:System: Interface ethernet 2/2/6, state up
Aug 13 16:30:39:I:System: Interface ethernet 2/2/6, state down
Aug 13 16:30:38:I:System: Interface ethernet 2/2/6, state up
Aug 13 16:30:37:I:System: Interface ethernet 2/2/6, state down
Aug 13 16:30:36:I:System: Interface ethernet 2/2/6, state up
Aug 13 16:30:35:I:System: Interface ethernet 2/2/6, state down
Aug 13 16:30:34:I:System: Interface ethernet 2/2/6, state up
Aug 13 16:30:33:I:System: Interface ethernet 2/2/6, state down
Aug 13 16:30:33:I:System: Interface ethernet 2/2/6, state up
Aug 13 16:30:32:I:System: Interface ethernet 2/2/6, state down
Aug 13 16:30:31:I:System: Interface ethernet 2/2/6, state up


Also why does the sh stack connection - change what is connected everytime I run it?

    active       standby                                                       
     +---+        +---+                                                        
 =2/6| 1 |2/1==2/6| 2 |2/1=                                                    
 |   +---+        +---+   |                                                    
 |                        |                                                    
 |------------------------|                                                   

trunk probe results: 2 links
Link 1: u1 -- u2, num=4
  1: 1/2/2 (T0) <---> 2/2/7 (T1)   
  2: 1/2/3 (T0) <---> 2/2/8 (T1)   
  3: 1/2/4 (T0) <---> 2/2/9 (T1)   
  4: 1/2/5 (T0) <---> 2/2/10(T1)   
Link 2: u1 -- u2, num=5
  1: 1/2/6 (T1) <---> 2/2/1 (T0)   
  2: 1/2/7 (T1) <---> 2/2/2 (T0)   
  3: 1/2/8 (T1) <---> 2/2/3 (T0)   
  4: 1/2/9 (T1) <---> 2/2/4 (T0)   
  5: 1/2/10(T1) <---> 2/2/5 (T0)

Link 1: u1 -- u2, num=5
  1: 1/2/1 (T0) <---> 2/2/6 (T1)   
  2: 1/2/2 (T0) <---> 2/2/7 (T1)   
  3: 1/2/3 (T0) <---> 2/2/8 (T1)   
  4: 1/2/4 (T0) <---> 2/2/9 (T1)   
  5: 1/2/5 (T0) <---> 2/2/10(T1)   
Link 2: u1 -- u2, num=5
  1: 1/2/6 (T1) <---> 2/2/1 (T0)   
  2: 1/2/7 (T1) <---> 2/2/2 (T0)   
  3: 1/2/8 (T1) <---> 2/2/3 (T0)   
  4: 1/2/9 (T1) <---> 2/2/4 (T0)   
  5: 1/2/10(T1) <---> 2/2/5 (T0)   
CPU to CPU packets are fine between 2 units.

I am so confused - I need to get this healthy remotely if possible.

Thanks!

Nick