[f-nsp] Flapping stack
Nick Cutting
ncutting at edgetg.co.uk
Mon Aug 17 03:36:00 EDT 2015
I was running FCXR08010g.bin
I am now running FCXR08010m.bin
Has been stable since the upgrade / reload on Thursday night.
Thank you
Nick
-----Original Message-----
From: Frank Bulk [mailto:frnkblk at iname.com]
Sent: 15 August 2015 00:15
To: Nick Cutting
Cc: foundry-nsp at puck.nether.net
Subject: RE: Flapping stack
What code are you running on that ICX6610?
Frank
-----Original Message-----
From: foundry-nsp [mailto:foundry-nsp-bounces at puck.nether.net] On Behalf Of Nick Cutting
Sent: Thursday, August 13, 2015 10:42 AM
To: foundry-nsp at puck.nether.net
Subject: [f-nsp] Flapping stack
Good afternoon chaps,
I have a flapping stack cable - but I can't seem to disable one of the cables - anyone knowhow to do this?
Any Ideas?
Boot-Monitor Image size = 370695, Version:10.1.00T7f5 (grz10100)
HW: Stackable ICX6610-24
SAN02#sh stack stack-ports
active standby
+---+ +---+
=2/6| 1 |2/1==2/6| 2 |2/1=
| +---+ +---+ |
| |
|------------------------|
U# Stack-port1 Stack-port2
1 up (1/2/1-1/2/2) up (1/2/6-1/2/7)
up ports: 1/2/1, 1/2/2, 1/2/3, 1/2/4, 1/2/5
up ports: 1/2/6, 1/2/7, 1/2/8, 1/2/9, 1/2/10
2 up (2/2/1-2/2/2) up (2/2/6-2/2/7)
up ports: 2/2/1, 2/2/2, 2/2/3, 2/2/4, 2/2/5
up ports: 2/2/6, 2/2/7, 2/2/8, 2/2/9, 2/2/10
Aug 13 16:30:48:I:System: Interface ethernet 2/2/6, state up Aug 13 16:30:47:I:System: Interface ethernet 2/2/6, state down Aug 13 16:30:47:I:System: Interface ethernet 2/2/6, state up Aug 13 16:30:45:I:System: Interface ethernet 2/2/6, state down Aug 13 16:30:45:I:System: Interface ethernet 2/2/6, state up Aug 13 16:30:44:I:System: Interface ethernet 2/2/6, state down Aug 13 16:30:43:I:System: Interface ethernet 2/2/6, state up Aug 13 16:30:42:I:System: Interface ethernet 2/2/6, state down Aug 13 16:30:41:I:System: Interface ethernet 2/2/6, state up Aug 13 16:30:40:I:System: Interface ethernet 2/2/6, state down Aug 13 16:30:40:I:System: Interface ethernet 2/2/6, state up Aug 13 16:30:39:I:System: Interface ethernet 2/2/6, state down Aug 13 16:30:38:I:System: Interface ethernet 2/2/6, state up Aug 13 16:30:37:I:System: Interface ethernet 2/2/6, state down Aug 13 16:30:36:I:System: Interface ethernet 2/2/6, state up Aug 13 16:30:35:I:System: Interface ethernet 2/2/6, state down Aug 13 16:30:34:I:System: Interface ethernet 2/2/6, state up Aug 13 16:30:33:I:System: Interface ethernet 2/2/6, state down Aug 13 16:30:33:I:System: Interface ethernet 2/2/6, state up Aug 13 16:30:32:I:System: Interface ethernet 2/2/6, state down Aug 13 16:30:31:I:System: Interface ethernet 2/2/6, state up
Also why does the sh stack connection - change what is connected everytime I run it?
active standby
+---+ +---+
=2/6| 1 |2/1==2/6| 2 |2/1=
| +---+ +---+ |
| |
|------------------------|
trunk probe results: 2 links
Link 1: u1 -- u2, num=4
1: 1/2/2 (T0) <---> 2/2/7 (T1)
2: 1/2/3 (T0) <---> 2/2/8 (T1)
3: 1/2/4 (T0) <---> 2/2/9 (T1)
4: 1/2/5 (T0) <---> 2/2/10(T1)
Link 2: u1 -- u2, num=5
1: 1/2/6 (T1) <---> 2/2/1 (T0)
2: 1/2/7 (T1) <---> 2/2/2 (T0)
3: 1/2/8 (T1) <---> 2/2/3 (T0)
4: 1/2/9 (T1) <---> 2/2/4 (T0)
5: 1/2/10(T1) <---> 2/2/5 (T0)
Link 1: u1 -- u2, num=5
1: 1/2/1 (T0) <---> 2/2/6 (T1)
2: 1/2/2 (T0) <---> 2/2/7 (T1)
3: 1/2/3 (T0) <---> 2/2/8 (T1)
4: 1/2/4 (T0) <---> 2/2/9 (T1)
5: 1/2/5 (T0) <---> 2/2/10(T1)
Link 2: u1 -- u2, num=5
1: 1/2/6 (T1) <---> 2/2/1 (T0)
2: 1/2/7 (T1) <---> 2/2/2 (T0)
3: 1/2/8 (T1) <---> 2/2/3 (T0)
4: 1/2/9 (T1) <---> 2/2/4 (T0)
5: 1/2/10(T1) <---> 2/2/5 (T0)
CPU to CPU packets are fine between 2 units.
I am so confused - I need to get this healthy remotely if possible.
Thanks!
Nick
_______________________________________________
foundry-nsp mailing list
foundry-nsp at puck.nether.net
http://puck.nether.net/mailman/listinfo/foundry-nsp
More information about the foundry-nsp
mailing list