[f-nsp] multicast routing and snooping inside vrf on Brocade MLX

[Tudor Capatina]

I am not really experienced on the subject so any input on thematter would be helpful. On interface 3/3 on vlan 4060 I have a deviceconnected which transmits  igmp packets. Vlan 4060 is configured for igmpsnooping. On ve230 – corresponding to vlan 239 – pim sparse is configured andit is a connection to an IPTV platform.  On the device connected to vlan 4060 I see igmp packets goingout but nothing coming back, also the IPTV provider says they do not receivethe querries from my side. Is there some flaw in this config or something I ammissing maybe? In terms of ip settings there is no issue, I can reach theremote infrastructure fine.If I connect  the same device which is now in vlan 4060 to vlan 239 I receive thestream. vrf IPTVrd 102:102address-family ipv4ip route 0.0.0.0/0  172.26.145.209/29ip multicast-routingexit-address-familyexit-vrf router pim vrf IPTVrp-address 93.95.248.254 vlan 239untagged ethe 1/16 router-interface ve 239 interface ve 239vrf forwarding IPTVip address 172.26.145.214/29ip pim-sparse vlan 4060tagged ethe 3/3  router-interface ve 1060multicast passive interface ve 1060vrf forwarding IPTVip address 172.26.150.193/26ip helper-address 172.29.2.3ip helper-address 172.29.1.10 Any input is appreciatedThanks,Tudor Capatina
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20150612/bcb63b1e/attachment-0001.html>