[f-nsp] Brocade IPSEC modules

[Eldon Koyle]

Sorry, I'm getting a bit off the topic of this thread.

Apparently I am wrong about the end of support version for ICX64xx...
It is 08030 that is the last available version.  The ICX6430-C12 is
only like 3 years old, though... seems a bit early to drop the line
from newer code versions.

There were changes between 08010 and 08030 that are incompatible with
our current implementation. They made some heavy changes to mac-based
authentication (mostly for the best), as well as some considerable
changes to the config syntax for mac-auth.

We had the auth-fail VLAN set to the default VLAN; they no longer
allow this (for "security" reasons, they said; it fails with an error
message).

Their final response to us is "that was never supported".  Seems to be
the default response for anything ICX related.

-- 
Eldon

On Tue, Aug 16, 2016 at 11:33 AM, Robert Hass <robhass at gmail.com> wrote:
> Well, we're running 8.0.30 builds on ICX64xx lines for few months without
> any special problems. Our campus is around 200+ switches.
> Problem is split between 8.0.30 and 8.0.40+ for ICX7xxx, as new features we
> can have just on few switches in new network :(
>
> Rob
>
>