[f-nsp] MLX and uRPF for RTBH

[Michael Gehrmann]

Hi All,

Wondering if anyone has used the uRPF feature on MLX to have the source
address of traffic matched to null0 routes?

My reading so far has lead me to a config like this:

reverse-path-check
urpf-exclude-default
!interface eth1/1
rpf-mode loose log

!


Example routes look like this:

device#sh ip route 2.144.0.0/24
        Destination        Gateway         Port          Cost          Type
Uptime src-vrf
1       2.144.0.0/24       DIRECT          drop          20/0          Be
3d1h   -

My next step is the lab.

Cheers
-- 
Michael Gehrmann
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20160713/6f1b27e8/attachment.html>