[f-nsp] MLX with "route-only" port is forwarding VLAN1 BPDUs?

[Steven Raymond]

> On Jun 24, 2016, at 1:19 PM, Gerald <gerald at ax.tc> wrote:
> 
> Is there a way to stop this? I would have my "route-only" ports Layer2
> free and not disturb other Layer2 systems behind.

Old old notes I found said basically 1) “bpdus are sent even with route-only”, and 2) "you should reboot after applying route-only".  

Both of which may not helpful to you.