[f-nsp] MLX with "route-only" port is forwarding VLAN1 BPDUs?

[Clement Cavadore]

You should create some "dummy" vlans on route-only ports, to avoid that. 
No problem having untagged vlan on any port with IP/routing configuration. You even ca do this without any disturbance.

Le 24 juin 2016 21:53:08 GMT+02:00, Gerald <gerald at ax.tc> a écrit :
>The MLX got a reboot some weeks ago, this seems not to help. I'am
>afraid
>of your (1) note... :-(.
>
>Gerald
>
>Am 24.06.2016 um 21:27 schrieb Steven Raymond:
>> 
>>> On Jun 24, 2016, at 1:19 PM, Gerald <gerald at ax.tc> wrote:
>>>
>>> Is there a way to stop this? I would have my "route-only" ports
>Layer2
>>> free and not disturb other Layer2 systems behind.
>> 
>> Old old notes I found said basically 1) “bpdus are sent even with
>route-only”, and 2) "you should reboot after applying route-only".  
>> 
>> Both of which may not helpful to you.
>> 
>> 
>> 
>_______________________________________________
>foundry-nsp mailing list
>foundry-nsp at puck.nether.net
>http://puck.nether.net/mailman/listinfo/foundry-nsp

-- 
Sent from my phone.
Please excuse any typos or mistakes.
But not both !