[f-nsp] Brocade cam profile / System max values

[Dennis op de Weegh]

Hi,

We have a Brocade MLXe-4 with one 4x 10 Gbit card and HSF's.

We get this warning in our logs:

CAM IPv6 partition warning: total 65536 (reserved 0), free 3276, slot 1, ppcr 0

But we have 27629 +- IPv6 routes (including internal routes)?

#show run | inc cam
cam-partition profile ipv4-ipv6-2

#show run | inc system-max
system-max vlan 4095
system-max rstp 128
system-max ip-cache 590000 - setting value next week to 768000
system-max ip-route 590000 - setting value next week to 768000
system-max virtual-interface 4095


#show default values | inc ipv6
ipv6-cache               65536      245760     65536      65536      65536      Yes
ipv6-route               65536      245760     65536      65536      65536      Yes
ipv6-mcast-cam           2048       16384      2048       2048       2048       No
ipv6-vrf-route           128        16384      128        128        128        Yes
ipv6-receive-cam         0          8192       0          0          0          No


system-max for ipv6 is default set to max.?




Regards,

Dennis
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20160310/ccb639ea/attachment.html>