[f-nsp] How to see the make and model of a transceiver

[Nick Cutting]

This is on a brocade ICX6610

Is there a brocade equivalent of the cisco command show interface x/y capabilities ?

The show interface command gives me the below:

SSH at ETGUKHEXSAN02#sh interfaces e 1/3/1
10GigabitEthernet1/3/1 is up, line protocol is up
  Port up for 18 days 19 hours 23 minutes 23 seconds
  Hardware is 10GigabitEthernet, address is cc4e.24c2.efa0 (bia cc4e.24c2.efc3)
  Interface type is 10Gig SFP+ Copper
  Configured speed 10Gbit, actual 10Gbit, configured duplex fdx, actual fdx

So I know it's a twinax cable (SFP+ copper - and I plugged it in)- but I was hoping to get more information ?

Any ideas?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20160323/066a62eb/attachment-0001.html>