[f-nsp] Transceiver "not supported" on ICX7750 in Breakout-Mode

[Franz Georg Köhler]

Am 19.05.16 um 16:27 schrieb ekoyle+puck.nether.net at gmail.com (Eldon 
Koyle):
> So you wanted to create a stack over a breakout cable?  I suspect there are
> some hardware or software limitations that make that difficult for brocade
> to implement.

No, we wanted to stack over the 40G interfaces and use one of the 
remaining 40G interfaces for break out.
However, this is currently unsupported as you cannot enable stacking 
mode as long as one of the ports in configured in breakout mode.


Best regards,

Franz Georg Köhler