[f-nsp] Brocade RX-4 to Cisco - Light but no link
Aaron
aaron at wholesaleinternet.net
Mon Sep 11 14:08:39 EDT 2017
Light at your side is -11? What is the other side? Your receive may be
okay but what about their receive? Unless this is a BIDI then you have
to check both fibers.
Aaron
On 9/11/2017 12:03 PM, Derek Maxwell wrote:
> Hello Franz,
>
> Yes, we have verified speed and auto-negotiate settings on both ends and tried every combination to no avail.
>
> Thank you.
>
>
> On 9/11/17, 5:21 AM, "foundry-nsp on behalf of Franz Georg Köhler" <foundry-nsp-bounces at puck.nether.net on behalf of lists at openunix.de> wrote:
>
> On Mi, Sep 06, 2017 at 07:53:57 +0000, Derek Maxwell <derek.maxwell at chosentechgroup.com> wrote:
> >
> > We have a Brocade/Foundry RX-4 with (2) 24 port fiber cards
> > (RX-BI-24F) and (2) 24 port copper cards (RX-BI-24C). One of our
> > transit providers is NTT, with whom we have a single GigE circuit
> > delivered over single mode fiber. It is a multi-km run, from 800 South
> > Hope to One Wilshire, then on to 900 North Alameda in LA, but well
> > within normal LX transceiver range. While we see light (neg 11
> > received) in optical monitoring, we cannot get a link to establish.
> > No combination of auto-negotiate / manual speed settings on our side
> > or NTT’s has been able to get a link up.
>
> When light levels are OK but there is no link this can be because of
> speed mismatch. Are both sides fixed on the same speed (1000 in this
> case)?
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> http://puck.nether.net/mailman/listinfo/foundry-nsp
--
================================================================
Aaron Wendel
Chief Technical Officer
Wholesale Internet, Inc. (AS 32097)
(816)550-9030
http://www.wholesaleinternet.com
================================================================
More information about the foundry-nsp
mailing list