[f-nsp] FCX High CPU Diagnostics

[Derek Maxwell]

That may have actually done the trick. We aren't using any snmp tools on this box, but I added no snmp-server to the config and that brought cpu back down to 1%. I'll keep watching and see where it lands.

If there are any other thoughts, feel free to send them over. I appreciate any input.

-----Original Message-----
From: Jörg Kost <jk at ip-clear.de> 
Sent: Wednesday, April 3, 2019 1:12 PM
To: Derek Maxwell <derek.maxwell at chosentechgroup.com>
Cc: foundry-nsp <foundry-nsp at puck.nether.net>
Subject: Re: [f-nsp] FCX High CPU Diagnostics

Can you eliminate any SNMP tool, that might spin the CPU around?

On 3 Apr 2019, at 21:49, Derek Maxwell wrote:

> Output of dm cpu:
>
> idle pid 0 id 536918812 cpu 0 usage                    0
> main pid 1 id 536918812 cpu 0 usage                    0
> flash pid 0 id 536918812 cpu 0 usage                    0
> arrays at 2238d894 and 2238dd6c
> from entry 78 to entry 35
> loop cnt: 3395 3626 -> 231
> read cnt: 57670 61592 -> 3922
> loop rate = 231/430 = 0
> rcode = 100 - (100*0/2550) = 100
> 99/100 busy, from 43 sec ago
>
> sho ip bgp sum does not show any FIB programming
>
> We have fewer than 10 routes in so we're definitely not exceeding any 
> limits.
>
> We have icmp redirects disabled
>
>