[f-nsp] NI-XMR-MR Management Module - Firmware

[James Braunegg]

Dear All

Looking at release notes is 5.6h the last firmware supported on the NI-XMR-MR Management Modules ?

I have some MLXe devices (1st gen) which were from what I can tell just a XMR with a new label from brocade called a MLXe

show module
Module                                                      Status                       Ports    Starting MAC
M1 (left ):NI-XMR-MR Management Module                      Active
M2 (right):NI-XMR-MR Management Module                      Standby(Ready State)
F1: NI-X-HSF Switch Fabric Module                           Active
F2: NI-X-HSF Switch Fabric Module                           Active
F3:
S1: NI-XMR-1Gx20-GC 20-port 10/100/1000 Copper Module       CARD_STATE_UP                20       0024.387f.ff00
S2: NI-XMR-1Gx20-SFP 20-port 1GbE/100FX Module              CARD_STATE_UP                20       0024.387f.ff30

show chassis
*** MLXe 4-slot Chassis ***

---POWERS ---
Power 1: (     32006000 103886119889 - AC 1200W): Installed (OK)
Power 2: (     32006000 103586103561 - AC 1200W): Installed (OK)
Power 3: not present
Power 4: not present
Total power budget for chassis = 2400 W
Total power used by system core = 450 W
Total power used by LPs = 341 W
Total power available = 1609 W
Slot Power-On Priority and Power Usage:
Slot1 pri=1 module type=NI-XMR-1Gx20-GC 20-port 10/100/1000 Copper Module power usage=156W
Slot2 pri=1 module type=NI-XMR-1Gx20-SFP 20-port 1GbE/100FX Module power usage=185W


I was able to boot up 6.3c firmware but it didn't let me configure anything saying firmware needs to be downgraded to below 5.8 ie 5.6


Kindest Regards

James Braunegg



[cid:image001.png at 01D280A4.01865B60]

1300 769 972<tel:1300%20769%20972> / 0488 997 207<tel:1300%20769%20972>

james at micron21.com<mailto:james at micron21.com>

www.micron21.com/<http://www.micron21.com/>


[cid:image002.png at 01D280A4.01865B60]<http://www.micron21.com/>


[cid:image003.png at 01D280A4.01865B60]<https://www.facebook.com/micron21/>

[cid:image004.png at 01D280A4.01865B60]<https://twitter.com/micron21>

Follow us on Twitter<https://twitter.com/micron21> for important service and system updates.


This message is intended for the addressee named above. It may contain privileged or confidential information. If you are not the intended recipient of this message you must not use, copy, distribute or disclose it to anyone other than the addressee. If you have received this message in error please return the message to the sender by replying to it and then delete the message from your computer.




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20200503/c16a2043/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image009.jpg
Type: image/jpeg
Size: 428 bytes
Desc: image009.jpg
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20200503/c16a2043/attachment-0004.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image010.jpg
Type: image/jpeg
Size: 2651 bytes
Desc: image010.jpg
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20200503/c16a2043/attachment-0005.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image011.jpg
Type: image/jpeg
Size: 771 bytes
Desc: image011.jpg
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20200503/c16a2043/attachment-0006.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image012.jpg
Type: image/jpeg
Size: 816 bytes
Desc: image012.jpg
URL: <https://puck.nether.net/pipermail/foundry-nsp/attachments/20200503/c16a2043/attachment-0007.jpg>