[f-nsp] SLX 9640 experiences
Fredy Künzler
kuenzler at init7.net
Mon Oct 26 05:54:17 EDT 2020
James,
We use 20.1.2d in production. Not too long though.
Regards,
Fredy / Init7
On 25.10.20 12:22, James Braunegg wrote:
> Dear All
>
>
>
> Just wondering if anyone is using slxos 20.1.2e and any feedback ?
>
>
>
> Kindest Regards
>
>
>
> *James Braunegg*
>
>
>
> cid:image001.png at 01D280A4.01865B60
>
>
>
> 1300 769 972 <tel:1300%20769%20972> / 0488 997 207 <tel:1300%20769%20972>
>
> _james at micron21.com <mailto:james at micron21.com>_
>
> www.micron21.com/ <http://www.micron21.com/>
>
>
>
> cid:image002.png at 01D280A4.01865B60 <http://www.micron21.com/>
>
> cid:image003.png at 01D280A4.01865B60 <https://www.facebook.com/micron21/>
>
>
>
> cid:image004.png at 01D280A4.01865B60 <https://twitter.com/micron21>
>
>
>
> Follow us on Twitter <https://twitter.com/micron21> for important
> service and system updates.
>
> This message is intended for the addressee named above. It may contain
> privileged or confidential information. If you are not the intended
> recipient of this message you must not use, copy, distribute or disclose
> it to anyone other than the addressee. If you have received this message
> in error please return the message to the sender by replying to it and
> then delete the message from your computer.
>
>
>
>
>
> *From:*foundry-nsp <foundry-nsp-bounces at puck.nether.net> *On Behalf Of
> *Robert Hass
> *Sent:* Friday, 3 April 2020 1:54 AM
> *To:* Fredy Kuenzler <kuenzler at init7.net>
> *Cc:* foundry-nsp <foundry-nsp at puck.nether.net>
> *Subject:* Re: [f-nsp] SLX 9640 experiences
>
>
>
> Hi Fredy
>
> Hope you are well. How about your deployment of new SLX'es in Init7
> network ? Probably in March as in every network your traffic increased a
> lot :)
>
> Hearing some experiences from You :)
>
>
>
> Cheers
>
> Rob
>
>
>
> On Fri, Dec 6, 2019 at 7:55 AM Fredy Kuenzler <kuenzler at init7.net
> <mailto:kuenzler at init7.net>> wrote:
>
> Hi Robert,
>
>
>
> Thanks for asking again. 2nd round of tests succeeded, we after a
> very long evaluation phase decided to buy the SLX 9640 and dumped
> the Cisco NCS-55A2. Apparently we‘re in good company if one wants to
> believe from hearsay.
>
>
>
> The first batch got delivered this week (see pic), we plan to power
> up a few in the lab anytime soon.
>
>
>
> Can’t say much more yet except they look nice with the violet front
> bezel 😇
>
>
>
> Meanwhile we launched a project to automate configuration. At the
> same time physical deployment in the many pops will take place. The
> goal is to have payload in Q1 on them and get rid off the MLXe and
> XMR by Q2 2020.
>
>
>
> image1.jpeg
>
>
>
> --
>
> Fredy Künzler
>
>
>
> Init7 (Switzerland) Ltd.
>
> Technoparkstrasse 5
>
> CH-8406 Winterthur
>
> https://www.init7.net/
>
>
> Am 05.12.2019 um 15:52 schrieb Robert Hass <robhass at gmail.com
> <mailto:robhass at gmail.com>>:
>
> Hi Fredy
>
> I'm curious how it's going with SLX after 2-3 months ? :)
>
> Please share your thoughts.
>
>
>
> Thanks!
>
>
>
> On Sat, Aug 24, 2019 at 8:54 PM Fredy Kuenzler
> <kuenzler at init7.net <mailto:kuenzler at init7.net>> wrote:
>
> Hi Robert,
>
>
>
> I‘m not too much into the details of the test. While Arista
> was out quite soon (lack of MPLS) we focused on Cisco
> NCS-55A2 which fulfilled our needs.
>
>
>
> However when it came to pricing the offer of Cisco was +1 on
> the seventh digit compared to Extreme SLX-9640 (we need to
> buy ~80 devices) so we started to reconsider the SLX,
> despite the first tests were not too promising. Maybe there
> is new software out which fixes the most annoying issues.
>
>
>
> The Ciscos simply exceed our budget, but I asked for a
> better deal which is still pending.
>
>
>
> We‘re probably go to buy two or three SLX and bring them
> into real production and when they fail we sell them 2nd
> hand. At least we would have a better feeling before
> spending the money.
>
>
>
> Ask me again for an update in about 8 weeks.
>
> --
>
> Fredy Kuenzler
>
> Init7 (Switzerland) Ltd.
>
> Technoparkstrasse 5
>
> CH-8406 Winterthur
>
> Switzerland
>
>
>
> http://www.init7.net/
>
>
>
>
> Am 24.08.2019 um 13:22 schrieb Robert Hass
> <robhass at gmail.com <mailto:robhass at gmail.com>>:
>
> Hi Fredy
>
> Did you finished your testing of SLX 9640 ? Any feedback
> comparing to tested Arista or NCS ?
>
>
>
> Thank a lot
>
> Rob
>
>
>
> On Mon, Jun 3, 2019 at 1:06 PM Fredy Kuenzler
> <kuenzler at init7.net <mailto:kuenzler at init7.net>> wrote:
>
>
> We are exactly doing an extensive evaluation of the
> three devices
> mentioned. Not there yet, unfortunately.
>
> https://twitter.com/init7/status/1126450891920375809
>
> --
> Fredy Kuenzler
>
> Init7 (Switzerland) Ltd.
> AS13030
> Technoparkstrasse 5
> CH-8406 Winterthur
> Twitter: @init7 / @kuenzler
> http://www.init7.net/
>
>
> Am 03.06.19 um 12:50 schrieb Robert Hass:
> > Hi
> > I'm looking for users of new SLX 9640. We consider
> that platform as
> > MLXe replacement in Internet (full DFZ) Edge/Core
> segments. Any
> > problems / comments ?
> >
> > BTW. Did anyone compared SLX 9640 versus Arista
> 7280 or NCS 5501-SE
> > ? I'm also happy to hear feedback.
> >
> > Rob
> >
> >
> >
> > _______________________________________________
> > foundry-nsp mailing list
> > foundry-nsp at puck.nether.net
> <mailto:foundry-nsp at puck.nether.net>
> > http://puck.nether.net/mailman/listinfo/foundry-nsp
> >
>
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net
> <mailto:foundry-nsp at puck.nether.net>
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
> _______________________________________________
> foundry-nsp mailing list
> foundry-nsp at puck.nether.net <mailto:foundry-nsp at puck.nether.net>
> http://puck.nether.net/mailman/listinfo/foundry-nsp
>
--
Fredy Künzler
Init7 (Switzerland) Ltd.
Technoparkstrasse 5
CH-8406 Winterthur
https://www.init7.net/
More information about the foundry-nsp
mailing list