[f-nsp] Debugging the SLX

[Jörg Kost]

Hello,

support was helpful, the command is

"terminal monitor"

like old IOSes.

Regards.

On 23 Feb 2021, at 18:02, Jörg Kost wrote:

> Hello,
>
> the MLX has an outstanding diagnostic guide, the SLX troubleshooting 
> guide is very limited till today:
>
> # show debug ip bgp
> 	 BGP(T):  general debugging is on
> 	 BGP(T):  updates RX debugging is on
> 	 BGP(T):  route-selection debugging is on
> 	 BGP(T):  cli debugging is on
> 	 BGP(T):  neighbor 80.249.209.255 debugging is on
>
>
> Do somebody know where to collect the logs for BGP or any at all? I 
> can't find any debug destination like on the MLX.
>
> The guide is very short and 9600-bauded:
>
> "If the device is accessed through Telnet, enable logging using a 
> terminal monitor."
> https://documentation.extremenetworks.com/slxos/SW/20xx/tsg/GUID-3B02D5A5-37F1-44D7-99DA-2706E0CD69C2.shtml
>
>
> Regards
> Jörg