[f-nsp] MLXe booting delays

[Jörg Kost]

Hello,

Does anyone also suffer from booting delays on MLXe with dual management 
boards since jumping on 6.2f (or e)?

Modules:
M1 (left ):BR-MLX-MR2-X Management Module                       Active
M2 (right):BR-MLX-MR2-X Management Module                       
Standby(Ready State)

Booting times have jumped from smooth 2-3 minutes to around 10 - 15 
minutes.

standby module complains on reload:
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode = 
0)
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode = 
0)
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode = 
0)
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode = 
0)
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode = 
0)
sent IPC_MSGTYPE_REBOOT to slot 16 (my_slot = 33, ipc_post_rx32_mode = 
0)
(for long long time, then finally boots)
received status 0, tx_id

management module takes a significant delay on bootup:

Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.
Busy sync to standby MP, please wait.


Regards

Jörg