It's funny--<br><br>I removed the secondary and tried to upgrade the firmware to 9.5. Here's the sho fla oputput on that one, now:<br><br>ServerIronGT E-1#sho fla<br>Active management module:<br>Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4<br>
Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288<br>Compressed Pri Code size = 5246093, Version 09.5.02pTD4 (WXR09502p.bin)<br>Compressed Sec Code size = 3934578, Version 09.4.00yTD2 (WXM09400y.bin)<br>Maximum Code Image Size Supported: 6946304 (0x0069fe00)<br>
Boot Image size = 292752, Version 09.05.02 (m2b09502.bin)<br>Used Configuration Flash Size=221, Max Configuration Flash Size=327680.<br><br>WSM module slot 1 CPU 1:<br>Code Flash Type: , Size: 0 * 0 = 0<br>Boot Flash Type: , Size: 0 * 0 = 0<br>
Compressed Pri Code: size = 0 Version<br>Compressed Sec Code: size = 0 Version<br>Maximum Code Image Size Supported: 0 (0x00000000)<br>Boot Image size = 0 Version<br>Maximum Boot Image Size Supported: 0 (0x00000000)<br>ServerIronGT E-1#<br>
<br>Note that the flash got burnt on this one, too.<br><br>Anyone got any suggestions?<br><br>Thanks much.<br><br><br><div class="gmail_quote">On Mon, Feb 23, 2009 at 11:37 AM, Jonas Frey <span dir="ltr"><<a href="mailto:jf@probe-networks.de">jf@probe-networks.de</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Hi,<br>
<br>
i guess only thing you can do is hard reboot the box.<br>
If you are unlucky the flash on the primary card has gone bad. Atleast<br>
it reports it cant read the config nvram.<br>
Even if the first card is dead you still have the secondary...and it<br>
should boot from that one. Make sure you have a backup of your config<br>
tho.<br>
Also that firmware is quite ancient....might be a good idea to upgrade<br>
to atleast 9.5.<br>
<br>
Regards,<br>
Jonas<br>
<div><div></div><div class="Wj3C7c"><br>
On Mon, 2009-02-23 at 19:41, Chuck Ufarley wrote:<br>
> My WSM6-1 card blanked out with a WSM CPU crash, and now the code<br>
> won't reload on the WSM module. I'm afraid to restart it and find a<br>
> brick. Below is the console output for the process. Every time I try<br>
> to load on a new WSM code, the transfer only goes to the secondary<br>
> management card. Also , the subsystem lights on the front only flash<br>
> for the secondary mgt, though the output states that the primary is<br>
> active. Removing the secondary card doesn't cause any shutdown.<br>
><br>
> Help greatly appreciated. Here's the output:<br>
><br>
> SLB-ServerIron#sho fla<br>
> Active management module:<br>
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4<br>
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288<br>
> Compressed Pri Code size = 3869358, Version 09.4.00mTD2<br>
> (WXM09400m.bin)<br>
> Compressed Sec Code size = 3934578, Version 09.4.00yTD2<br>
> (WXM09400y.bin)<br>
> Maximum Code Image Size Supported: 7011840 (0x006afe00)<br>
> Boot Image size = 270912, Version 07.06.54 (wsm-b54.bin)<br>
> INFO: empty config data in the primary area, try to read from backup<br>
> INFO: empty config data in the backup area also<br>
> Configuration Data Flash is empty.<br>
> Used Configuration Flash Size=0, Max Configuration Flash Size=327680.<br>
><br>
> Standby management module:<br>
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4<br>
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288<br>
> Compressed Pri Code size = 3869358, Version 09.4.00mTD2<br>
> (WXM09400m.bin)<br>
> Compressed Sec Code size = 3934578, Version 09.4.00yTD2<br>
> (WXM09400y.bin)<br>
> Maximum Code Image Size Supported: 7011840 (0x006afe00)<br>
> Boot Image Version 07.06.54 (wsm-b54.bin)<br>
><br>
> WSM module slot 1 CPU 1:<br>
> Code Flash Type: AMD , Size: 0 * 0 = 0<br>
> Boot Flash Type: AMD , Size: 0 * 0 = 0<br>
> Compressed Pri Code: size = 0 Version<br>
> Compressed Sec Code: size = 0 Version<br>
> Maximum Code Image Size Supported: 0 (0x00000000)<br>
> Boot Image size = 0 Version<br>
> Maximum Boot Image Size Supported: 0 (0x00000000)<br>
><br>
> WSM module slot 2 CPU 1:<br>
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304<br>
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288<br>
> Compressed Pri Code: size = 1632640 Version 09.4.00mTF2<br>
> Compressed Sec Code: size = 1632640 Version 09.4.00mTF2<br>
> Maximum Code Image Size Supported: 2096640 (0x001ffe00)<br>
> Boot Image size = 57444 Version 07.06.54 (wsp-b54.bin)<br>
> Maximum Boot Image Size Supported: 458752 (0x00070000)<br>
> SLB-ServerIron#sho fla<br>
> Active management module:<br>
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4<br>
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288<br>
> Compressed Pri Code size = 3869358, Version 09.4.00mTD2<br>
> (WXM09400m.bin)<br>
> Compressed Sec Code size = 3934578, Version 09.4.00yTD2<br>
> (WXM09400y.bin)<br>
> Maximum Code Image Size Supported: 7011840 (0x006afe00)<br>
> Boot Image size = 270912, Version 07.06.54 (wsm-b54.bin)<br>
> INFO: empty config data in the primary area, try to read from backup<br>
> INFO: empty config data in the backup area also<br>
> Configuration Data Flash is empty.<br>
> Used Configuration Flash Size=0, Max Configuration Flash Size=327680.<br>
><br>
> Standby management module:<br>
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304, Unit: 4<br>
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288<br>
> Compressed Pri Code size = 3869358, Version 09.4.00mTD2<br>
> (WXM09400m.bin)<br>
> Compressed Sec Code size = 3934578, Version 09.4.00yTD2<br>
> (WXM09400y.bin)<br>
> Maximum Code Image Size Supported: 7011840 (0x006afe00)<br>
> Boot Image Version 07.06.54 (wsm-b54.bin)<br>
><br>
> WSM module slot 1 CPU 1:<br>
> Code Flash Type: AMD , Size: 0 * 0 = 0<br>
> Boot Flash Type: AMD , Size: 0 * 0 = 0<br>
> Compressed Pri Code: size = 0 Version<br>
> Compressed Sec Code: size = 0 Version<br>
> Maximum Code Image Size Supported: 0 (0x00000000)<br>
> Boot Image size = 0 Version<br>
> Maximum Boot Image Size Supported: 0 (0x00000000)<br>
><br>
> WSM module slot 2 CPU 1:<br>
> Code Flash Type: AMD 29LV033C, Size: 64 * 65536 = 4194304<br>
> Boot Flash Type: AMD 29LV040B, Size: 8 * 65536 = 524288<br>
> Compressed Pri Code: size = 1632640 Version 09.4.00mTF2<br>
> Compressed Sec Code: size = 1632640 Version 09.4.00mTF2<br>
> Maximum Code Image Size Supported: 2096640 (0x001ffe00)<br>
> Boot Image size = 57444 Version 07.06.54 (wsp-b54.bin)<br>
> Maximum Boot Image Size Supported: 458752 (0x00070000)<br>
> SLB-ServerIron#sho ver<br>
> SW: Version 09.4.00mTD2 Copyright (c) 1996-2003 Foundry Networks,<br>
> Inc.<br>
> Compiled on May 03 2006 at 20:38:33 labeled as WXM09400m<br>
> (3869358 bytes) from Primary WXM09400m.bin<br>
> HW: ServerIronGT E-1 Switch, SYSIF version 21, Serial #: Non-exist<br>
> ==========================================================================<br>
> SL 1: B0GMR WSM6 Management Module, SYSIF 2, M6, ACTIVE<br>
> Serial #: CH17061827<br>
> App CPU's in the process of coming up!<br>
> 16384 KB BRAM, SMC version 5, BM version 21<br>
> ==========================================================================<br>
> SL 2: B0GMR WSM6 Management Module, SYSIF 2, M6, STANDBY<br>
> Serial #: CH50050072<br>
> 0 MB SHM, 1 Application Processors<br>
> 16384 KB BRAM, SMC version 5, BM version 21<br>
> SW: (1)09.4.00mTF2<br>
> ==========================================================================<br>
> SL 3: J-BxG2 JetCore Gig Fiber Module, SYSIF 2 (Mini GBIC)<br>
> Serial #: CX04050362<br>
> 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a<br>
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 8, version 0449<br>
> ==========================================================================<br>
> SL 4: J-BxGC16 JetCore Gig Copper Module, SYSIF 2<br>
> Serial #: CH05060646<br>
> 4096 KB BRAM, JetCore ASIC IGC version 49, BIA version 8a<br>
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 12, version 0449<br>
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 13, version 0449<br>
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 14, version 0449<br>
> 32768 KB PRAM and 2M-Bit*1 CAM for IGC 15, version 0449<br>
> ==========================================================================<br>
> Active management module:<br>
> 1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus<br>
> 512 KB boot flash memory<br>
> 16384 KB code flash memory<br>
> 512 KB SRAM<br>
> 512 MB DRAM<br>
> Standby management module:<br>
> 1.0 GHz Power PC processor 750GX (version 7002/0102) 66 MHz bus<br>
> 512 KB boot flash memory<br>
> 16384 KB code flash memory<br>
> 512 KB SRAM<br>
> 512 MB DRAM<br>
> The system uptime is 55 minutes 40 seconds<br>
> The system : started=cold start<br>
><br>
> SLB-ServerIron#wsm copy tftp fla 192.168.0.35 wsp-b54.bin boot<br>
> SLB-ServerIron#Programming WSM module flash at slot 2, please wait ...<br>
><br>
> WSM module 2 flash operation done<br>
><br>
> SLB-ServerIron#<br>
><br>
><br>
</div></div>> ______________________________________________________________________<br>
> _______________________________________________<br>
> foundry-nsp mailing list<br>
> <a href="mailto:foundry-nsp@puck.nether.net">foundry-nsp@puck.nether.net</a><br>
> <a href="http://puck.nether.net/mailman/listinfo/foundry-nsp" target="_blank">http://puck.nether.net/mailman/listinfo/foundry-nsp</a><br>
<br>
<br>
</blockquote></div><br>