<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
</head>
<body bgcolor="#ffffff" text="#000000">
Hi Eric and Dimitar,<br>
<br>
I am planning on replacing the fiber strands and also the SFP modules,
on the slight chance there is something wrong with one of them.<br>
<br>
As for the port configuration, they were all set to <br>
<br>
no flow-control<br>
gig-default neg-off<br>
<br>
I am planning on putting that strand up on an empty port on my BI and
assign an IP to the interface with a server at the other end of the /30
so I can test the line to make sure everything is working. If I don't
see any packet loss then I will be moving the fiber to 1/8 and setting
up the trunk again. <br>
<br>
Thanks for everything<br>
<br>
Joe<br>
<br>
<pre>> Are all the ports configured identical to the primary ports? Make sure the ports are in the correct grouping?
>
> ----- Original Message ----
> From: Dimitar Kostadinov <<a
href="http://puck.nether.net/mailman/listinfo/foundry-nsp">kgb at bginfo.net</a>>
> To: <a href="http://puck.nether.net/mailman/listinfo/foundry-nsp">foundry-nsp at puck.nether.net</a>
> Sent: Thursday, July 9, 2009 1:59:32 AM
> Subject: Re: [f-nsp] Trunking Problem
> On Wed, 08 Jul 2009 19:38:28 -0400
> May be one of Your fiber dont work good.
> 1. check one by one link BI-1/1 <=> FI-1/7 and BI-1/2 <=> FI-1/8
</pre>
<br>
</body>
</html>