<HTML dir=ltr><HEAD>
<META content="text/html; charset=unicode" http-equiv=Content-Type>
<META name=GENERATOR content="MSHTML 8.00.6001.18813"></HEAD>
<BODY>
<DIV dir=ltr id=idOWAReplyText63393>
<DIV dir=ltr><FONT color=#000000 size=2 face=Arial>Do a "show run" and double check to see if you are booting off the image on the card. You should see something like this:</FONT></DIV>
<DIV dir=ltr><FONT size=2 face=Arial></FONT> </DIV>
<DIV dir=ltr><FONT size=2 face=Arial>lp boot system flash secondary 1<BR>lp boot system flash secondary 2<BR>lp boot system flash secondary 3<BR>lp boot system flash secondary 4<BR>lp boot system flash secondary 5<BR></FONT></DIV>
<DIV dir=ltr><FONT size=2 face=Arial></FONT> </DIV>
<DIV dir=ltr><FONT size=2 face=Arial>If the slot you are having issues with is still in interactive mode make sure you go into conf t and change it. </FONT></DIV>
<DIV dir=ltr><FONT size=2 face=Arial></FONT> </DIV>
<DIV dir=ltr><FONT size=2 face=Arial>I've had issues where I've had to manually upgrade the card. You can find the how-to in the Foundry documentation on their website.</FONT></DIV>
<DIV dir=ltr><FONT size=2 face=Arial></FONT> </DIV>
<DIV dir=ltr><FONT color=#000000 size=2 face=Arial></FONT> </DIV></DIV>
<DIV dir=ltr id=idSignature38380>
<DIV><FONT color=#000000 size=2 face=Arial></FONT> </DIV>
<DIV><FONT color=#000000 size=2 face=Arial>Daniel Faubel<BR>Net2EZ - Managed Data Centers<BR>Network Manager<BR>310-426-9933 x1 NOC<BR>310-426-9933 x110 Direct<BR>daniel@net2ez.com</FONT></DIV></DIV>
<DIV dir=ltr><BR>
<HR tabIndex=-1>
<FONT size=2 face=Tahoma><B>From:</B> foundry-nsp-bounces@puck.nether.net on behalf of Chuck Ufarley<BR><B>Sent:</B> Mon 8/3/2009 2:17 PM<BR><B>To:</B> foundry-nsp@puck.nether.net<BR><B>Subject:</B> [f-nsp] Line Cards not Booting on NI-MLX-4<BR></FONT><BR></DIV>
<DIV>Hi all--<BR><BR>I've got a couple of NI-MLX-1Gx20-SFPs that I'm trying to bring up on an NI-MLX-MR running 4.00ca, and I can't get the cards to boot. They keep looping through a "CARD_STATE_BOOT" "CARD_STATE_SW_LOADED " "CARD_STATE_SYNC_FID" loop, but won't come up active. I can't update the lp files unless the card comes up. I've tried this:<BR><BR>
<STYLE>
<!--
font-face
{font-family:"Cambria Math";}
font-face
{font-family:Calibri;}
p.MsoNormal, li.MsoNormal, div.MsoNormal
{
margin:0in;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
.MsoChpDefault
{
font-size:10.0pt;}
div.Section1
{page:Section1;}
-->
</STYLE>
<SPAN style="FONT-SIZE: 11pt">Config t<BR> lp boot system interactive [slot#]<BR>exit<BR> wr mem<BR>Power-off lp [slot#]<BR>Power-on lp [slot#]<BR>lp boot system mp primary [slot#]</SPAN><BR><BR>and the lp images load from the mp, but they don't seem to stick, because the line card doesn't go active.<BR><BR>Do I need to issue a "no lp boot system interactive" + new "wr mem" + reload command to get it up and running? It doesn't seem to work. Am I missing something obvious.<BR><BR>Help is extremely appreciated. I'm a little stumped right now.<BR><BR>Thanks.<BR><BR>--Chuck<BR></DIV></BODY></HTML>