<html xmlns:v="urn:schemas-microsoft-com:vml" xmlns:o="urn:schemas-microsoft-com:office:office" xmlns:w="urn:schemas-microsoft-com:office:word" xmlns:x="urn:schemas-microsoft-com:office:excel" xmlns:p="urn:schemas-microsoft-com:office:powerpoint" xmlns:a="urn:schemas-microsoft-com:office:access" xmlns:dt="uuid:C2F41010-65B3-11d1-A29F-00AA00C14882" xmlns:s="uuid:BDC6E3F0-6DA3-11d1-A2A3-00AA00C14882" xmlns:rs="urn:schemas-microsoft-com:rowset" xmlns:z="#RowsetSchema" xmlns:b="urn:schemas-microsoft-com:office:publisher" xmlns:ss="urn:schemas-microsoft-com:office:spreadsheet" xmlns:c="urn:schemas-microsoft-com:office:component:spreadsheet" xmlns:odc="urn:schemas-microsoft-com:office:odc" xmlns:oa="urn:schemas-microsoft-com:office:activation" xmlns:html="http://www.w3.org/TR/REC-html40" xmlns:q="http://schemas.xmlsoap.org/soap/envelope/" xmlns:rtc="http://microsoft.com/officenet/conferencing" xmlns:D="DAV:" xmlns:Repl="http://schemas.microsoft.com/repl/" xmlns:mt="http://schemas.microsoft.com/sharepoint/soap/meetings/" xmlns:x2="http://schemas.microsoft.com/office/excel/2003/xml" xmlns:ppda="http://www.passport.com/NameSpace.xsd" xmlns:ois="http://schemas.microsoft.com/sharepoint/soap/ois/" xmlns:dir="http://schemas.microsoft.com/sharepoint/soap/directory/" xmlns:ds="http://www.w3.org/2000/09/xmldsig#" xmlns:dsp="http://schemas.microsoft.com/sharepoint/dsp" xmlns:udc="http://schemas.microsoft.com/data/udc" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:sub="http://schemas.microsoft.com/sharepoint/soap/2002/1/alerts/" xmlns:ec="http://www.w3.org/2001/04/xmlenc#" xmlns:sp="http://schemas.microsoft.com/sharepoint/" xmlns:sps="http://schemas.microsoft.com/sharepoint/soap/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:udcs="http://schemas.microsoft.com/data/udc/soap" xmlns:udcxf="http://schemas.microsoft.com/data/udc/xmlfile" xmlns:udcp2p="http://schemas.microsoft.com/data/udc/parttopart" xmlns:wf="http://schemas.microsoft.com/sharepoint/soap/workflow/" xmlns:dsss="http://schemas.microsoft.com/office/2006/digsig-setup" xmlns:dssi="http://schemas.microsoft.com/office/2006/digsig" xmlns:mdssi="http://schemas.openxmlformats.org/package/2006/digital-signature" xmlns:mver="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:m="http://schemas.microsoft.com/office/2004/12/omml" xmlns:mrels="http://schemas.openxmlformats.org/package/2006/relationships" xmlns:spwp="http://microsoft.com/sharepoint/webpartpages" xmlns:ex12t="http://schemas.microsoft.com/exchange/services/2006/types" xmlns:ex12m="http://schemas.microsoft.com/exchange/services/2006/messages" xmlns:pptsl="http://schemas.microsoft.com/sharepoint/soap/SlideLibrary/" xmlns:spsl="http://microsoft.com/webservices/SharePointPortalServer/PublishedLinksService" xmlns:Z="urn:schemas-microsoft-com:" xmlns:st="" xmlns="http://www.w3.org/TR/REC-html40">
<head>
<meta http-equiv=Content-Type content="text/html; charset=utf-8">
<meta name=Generator content="Microsoft Word 12 (filtered medium)">
<title>Re: [f-nsp] Line Cards not Booting on NI-MLX-4</title>
<style>
<!--
/* Font Definitions */
@font-face
{font-family:Calibri;
panose-1:2 15 5 2 2 2 4 3 2 4;}
@font-face
{font-family:Tahoma;
panose-1:2 11 6 4 3 5 4 4 2 4;}
@font-face
{font-family:Consolas;
panose-1:2 11 6 9 2 2 4 3 2 4;}
/* Style Definitions */
p.MsoNormal, li.MsoNormal, div.MsoNormal
{margin:0cm;
margin-bottom:.0001pt;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
a:link, span.MsoHyperlink
{mso-style-priority:99;
color:blue;
text-decoration:underline;}
a:visited, span.MsoHyperlinkFollowed
{mso-style-priority:99;
color:purple;
text-decoration:underline;}
p
{mso-style-priority:99;
mso-margin-top-alt:auto;
margin-right:0cm;
mso-margin-bottom-alt:auto;
margin-left:0cm;
font-size:12.0pt;
font-family:"Times New Roman","serif";}
pre
{mso-style-priority:99;
mso-style-link:"HTML Preformatted Char";
margin:0cm;
margin-bottom:.0001pt;
font-size:10.0pt;
font-family:"Courier New";}
p.MsoAcetate, li.MsoAcetate, div.MsoAcetate
{mso-style-priority:99;
mso-style-link:"Balloon Text Char";
margin:0cm;
margin-bottom:.0001pt;
font-size:8.0pt;
font-family:"Tahoma","sans-serif";}
span.HTMLPreformattedChar
{mso-style-name:"HTML Preformatted Char";
mso-style-priority:99;
mso-style-link:"HTML Preformatted";
font-family:Consolas;}
span.EmailStyle20
{mso-style-type:personal-reply;
font-family:"Calibri","sans-serif";
color:#1F497D;}
span.BalloonTextChar
{mso-style-name:"Balloon Text Char";
mso-style-priority:99;
mso-style-link:"Balloon Text";
font-family:"Tahoma","sans-serif";}
.MsoChpDefault
{mso-style-type:export-only;
font-size:10.0pt;}
@page Section1
{size:612.0pt 792.0pt;
margin:72.0pt 72.0pt 72.0pt 72.0pt;}
div.Section1
{page:Section1;}
-->
</style>
<!--[if gte mso 9]><xml>
<o:shapedefaults v:ext="edit" spidmax="1026" />
</xml><![endif]--><!--[if gte mso 9]><xml>
<o:shapelayout v:ext="edit">
<o:idmap v:ext="edit" data="1" />
</o:shapelayout></xml><![endif]-->
</head>
<body lang=EN-GB link=blue vlink=purple>
<div class=Section1>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Chuck,<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'> <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Check the show flash output and see that the codes for the LP
Kernal Image and Monitor Image are correct.<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>I had this problem on a XMR and this fixed the “Coherence Check
Warning”<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Good Luck <o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'>Frankie<o:p></o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<p class=MsoNormal><span style='font-size:11.0pt;font-family:"Calibri","sans-serif";
color:#1F497D'><o:p> </o:p></span></p>
<div>
<div style='border:none;border-top:solid #B5C4DF 1.0pt;padding:3.0pt 0cm 0cm 0cm'>
<p class=MsoNormal><b><span lang=EN-US style='font-size:10.0pt;font-family:
"Tahoma","sans-serif"'>From:</span></b><span lang=EN-US style='font-size:10.0pt;
font-family:"Tahoma","sans-serif"'> foundry-nsp-bounces@puck.nether.net
[mailto:foundry-nsp-bounces@puck.nether.net] <b>On Behalf Of </b>Frankie
John-Lewis<br>
<b>Sent:</b> 11 August 2009 00:31<br>
<b>To:</b> daniel@net2ez.com; markentime@gmail.com<br>
<b>Cc:</b> foundry-nsp@puck.nether.net<br>
<b>Subject:</b> Re: [f-nsp] Line Cards not Booting on NI-MLX-4<o:p></o:p></span></p>
</div>
</div>
<p class=MsoNormal><o:p> </o:p></p>
<p style='margin-bottom:12.0pt'><span style='font-size:10.0pt'>Chuck,<br>
<br>
Have you still got the original image in the secondary?<br>
<br>
Also, do you have two management cards?<br>
<br>
If this is the case remove one of the cards and boot of the secondary.<br>
<br>
I might have missed this but if you are moving from a version 3 to 4 coipy all
the files over.<br>
<br>
Also stay away from the unified image and load all the files seperately<br>
<br>
If you have time can you send the sh flash and sh ver command<br>
<br>
----- Original Message -----<br>
From: foundry-nsp-bounces@puck.nether.net
<foundry-nsp-bounces@puck.nether.net><br>
To: Chuck Ufarley <markentime@gmail.com><br>
Cc: foundry-nsp@puck.nether.net <foundry-nsp@puck.nether.net><br>
Sent: Tue Aug 11 00:15:23 2009<br>
Subject: Re: [f-nsp] Line Cards not Booting on NI-MLX-4<br>
<br>
The only think I would say is double check the version numbers. Make sure you
are booting on the correct flash (primary, secondary).<br>
<br>
<br>
<br>
Daniel Faubel<br>
Network Manager<br>
Net2EZ - Managed Data Centers<br>
310-426-9933 x1 NOC<br>
310-426-9933 x110 Direct<br>
daniel@net2ez.com<br>
<br>
________________________________<br>
<br>
From: Chuck Ufarley [<a href="mailto:markentime@gmail.com">mailto:markentime@gmail.com</a>]<br>
Sent: Monday, August 10, 2009 3:48 PM<br>
To: Daniel Faubel<br>
Cc: foundry-nsp@puck.nether.net<br>
Subject: Re: [f-nsp] Line Cards not Booting on NI-MLX-4<br>
<br>
<br>
<br>
I've done all that, except for the xgmac, which doesn't apply. <br>
<br>
I've also uploaded the fpga bundle. <br>
<br>
I've got a 20 port copper card running, but only if I issue the lp cont-boot
no-sync command every reload. Otherwise, it too goes into interactive
mode, claiming an application mismatch. <br>
<br>
These images are from 4000ca, the same directory, the same zip file. It's
completely bizarre, to me.<br>
<br>
Anyone have other ideas? Please?<br>
<br>
Thanks again.<br>
<br>
--Chuck<br>
<br>
On Mon, Aug 10, 2009 at 3:24 PM, Daniel Faubel <daniel@net2ez.com> wrote:<br>
<br>
Guessing you did all of this?<br>
<br>
<br>
<br>
6. Go to config mode and set the module for interactive mode:<br>
<br>
NetIron(config)# lp boot system interactive <slot number><br>
<br>
7. Insert the new module (module should boot to interactive mode).<br>
<br>
8. Load all required images for the line modules that match the current version
loaded on the chassis.<br>
<br>
For example:<br>
<br>
copy tftp lp <ip-addr> xmlb03100l.bin monitor <slot number><br>
<br>
copy tftp lp <ip-addr> xmlprm03100l.bin boot <slot number><br>
<br>
copy tftp lp <ip-addr> xmlp03100l.bin primary <slot number><br>
<br>
copy tftp lp <ip-addr> pbifsp2_03100l.bin fpga-pbif <slot number><br>
<br>
copy tftp lp <ip-addr> xppsp2_03100l.bin fpga-xpp <slot number><br>
<br>
copy tftp lp <ip-addr> xgmacsp2_03100l.bin fpga-xgmac <slot number><br>
<br>
9. Go to config mode and turn off the module for interactive mode:<br>
<br>
NetIron(config)# no lp boot system interactive <slot number><br>
<br>
10. Exit config mode and reboot the module:<br>
<br>
NetIron# power-off lp <slot number><br>
<br>
NetIron# power-on lp <slot number><br>
<br>
<br>
<br>
<br>
<br>
Daniel Faubel<br>
Network Manager<br>
Net2EZ - Managed Data Centers<br>
310-426-9933 x1 NOC<br>
310-426-9933 x110 Direct<br>
daniel@net2ez.com<br>
<br>
________________________________<br>
<br>
From: foundry-nsp-bounces@puck.nether.net [<a
href="mailto:foundry-nsp-bounces@puck.nether.net">mailto:foundry-nsp-bounces@puck.nether.net</a>]
On Behalf Of Chuck Ufarley<br>
Sent: Monday, August 10, 2009 2:51 PM<br>
To: foundry-nsp@puck.nether.net<br>
Subject: Re: [f-nsp] Line Cards not Booting on NI-MLX-4<br>
<br>
<br>
<br>
This is a fascinating problem with these NI-MLXs, because really, no two cards
seem to act alike. I'm trying to configure a second NI-MLX, and I'm
getting this response, now:<br>
<br>
WARN: LP slot 1's application image version ( 3 3 0 6)
doesn't match that of the MP ( 4 0 0 3) - put LP in
interactive mode.<br>
<br>
Updating fpgas for the card doesn't work.<br>
Trying to get the line card to boot from from the mp primary doesn't work.<br>
Pulling in and out of interactive mode doesn't work.<br>
Updating ironware and monitor/boot image separately doesn't work<br>
Reloading the entire image and then loading fpgas doesn't work.<br>
<br>
Each tried several times. Has anyone else seen these things as just
unreliable? I can't get a simple line card to just come up.<br>
<br>
Help, as usual, is very much appreciated.<br>
<br>
--Chuck<br>
<br>
On Mon, Aug 3, 2009 at 3:35 PM, Asoka De Saram <adesaram@yahoo.com>
wrote:<br>
<br>
Chuck,<br>
<br>
Do you have the latest fpga images in these two cards?<br>
<br>
If not boot them in to interactive mode and download them from a tftp server.<br>
<br>
<br>
<br>
<br>
<br>
<br>
On Aug 3, 2009, at 2:17 PM, Chuck Ufarley <markentime@gmail.com> wrote:<br>
<br>
Hi all--<br>
<br>
I've got a couple of
NI-MLX-1Gx20-SFPs that I'm trying to bring up on an NI-MLX-MR running 4.00ca,
and I can't get the cards to boot. They keep looping through a
"CARD_STATE_BOOT" "CARD_STATE_SW_LOADED "
"CARD_STATE_SYNC_FID" loop, but won't come up active. I can't
update the lp files unless the card comes up. I've tried this:<br>
<br>
Config t<br>
lp boot system interactive
[slot#]<br>
exit<br>
wr mem<br>
Power-off lp [slot#]<br>
Power-on lp [slot#]<br>
lp boot system mp primary [slot#]<br>
<br>
and the lp images load from the mp,
but they don't seem to stick, because the line card doesn't go active.<br>
<br>
Do I need to issue a "no lp
boot system interactive" + new "wr mem" + reload command to get
it up and running? It doesn't seem to work. Am I missing something
obvious.<br>
<br>
Help is extremely appreciated.
I'm a little stumped right now.<br>
<br>
Thanks.<br>
<br>
--Chuck<br>
<br>
_______________________________________________<br>
foundry-nsp mailing list<br>
foundry-nsp@puck.nether.net<br>
<a
href="http://puck.nether.net/mailman/listinfo/foundry-nsp">http://puck.nether.net/mailman/listinfo/foundry-nsp</a><br>
<br>
<br>
<br>
<br>
<br>
<br>
</span><o:p></o:p></p>
<pre>--------------------------------------------------------------------------------<o:p></o:p></pre><pre><o:p> </o:p></pre><pre>This message is for information purposes only and is not intended as an <o:p></o:p></pre><pre>offer, recommendation or solicitation to buy or sell, nor is it an official <o:p></o:p></pre><pre>confirmation of terms. No representation or warranty is made that this <o:p></o:p></pre><pre>information is complete or accurate. Any views or opinions expressed do not<o:p></o:p></pre><pre>necessarily represent those of ODL Securities Limited. This email and the <o:p></o:p></pre><pre>information it contains may be confidential, proprietary or legally privileged. <o:p></o:p></pre><pre>If you receive this message in error, please notify the sender and delete it<o:p></o:p></pre><pre>from your system. You must not, directly or indirectly, use, disclose, <o:p></o:p></pre><pre>distribute, copy or store this message or any part of it if you are not the <o:p></o:p></pre><pre>intended recipient. Unless otherwise stated, any pricing information given in <o:p></o:p></pre><pre>this email is indicative only, is subject to changes and does not constitute <o:p></o:p></pre><pre>an offer to deal at any price quoted. <o:p></o:p></pre><pre><o:p> </o:p></pre><pre>ODL Securities Limited is authorised and regulated by the Financial Services Authority.<o:p></o:p></pre><pre><o:p> </o:p></pre><pre>--------------------------------------------------------------------------------<o:p></o:p></pre><pre><o:p> </o:p></pre></div>
</body>
</html>
<pre>--------------------------------------------------------------------------------
This message is for information purposes only and is not intended as an
offer, recommendation or solicitation to buy or sell, nor is it an official
confirmation of terms. No representation or warranty is made that this
information is complete or accurate. Any views or opinions expressed do not
necessarily represent those of ODL Securities Limited. This email and the
information it contains may be confidential, proprietary or legally privileged.
If you receive this message in error, please notify the sender and delete it
from your system. You must not, directly or indirectly, use, disclose,
distribute, copy or store this message or any part of it if you are not the
intended recipient. Unless otherwise stated, any pricing information given in
this email is indicative only, is subject to changes and does not constitute
an offer to deal at any price quoted.
ODL Securities Limited is authorised and regulated by the Financial Services Authority.
--------------------------------------------------------------------------------